what distribitor

i have a 354 hemi . i want a distribitor that looks right on the car which is a 30 chrysler i would like a hei but not to look hei.i saw a mag distribitor.but dont know if it would fit 50s or 60s era. please give me some options on what distribitors i could use and still look period

 

Use the Stock dual point distributor with a Pertronix unit in it. When the cap is on, you can't tell it's not Stock...

 

I would just go with something like this in the stock distributor body if I wanted electronic ignition with a stock look...

http://www.pertronix.com/prod/ig/ignitor/default.aspx

 

345 Desoto has better/faster typing skills

 

convert stock dizzy to electronic by sending it to GMC Bubba..
He did my Desoto...looks stock, full electronic...I hate Petronix....

 

Don't be a hater
And by the way Jim (GMC Bubba) uses our products in some of his conversions!
Don from PerTronix

 

You can also ''hide" a MSD box and just use a stock distributor with points to trigger. The points will last forever since they won't be carrying current. (Though this will cost more than a Pertronix solution)

 

If they are not carrying current, then how do they work?

 

did they run the mag distributor back in the day?im asking because i saw a mag look a like on ebay and it was hei.

 

Most of those are not true "HEI" but are electronic conversions with a Hall Effect sensor for pickup.
Pretty much only racers, or hardcore street racers, ran magneto's

 

Joe Hunt magneto distributor?

 

I know.....
But NOT in my Desoto Dizzy

 

No problem, lets make your stock distributor a HEI , remote mounted module and low resistance coil . Great system looks good with the orginal distributor painted blasck.. i use a dodge reluctor and pickup coil hooked to the hei module on this conversion........pm for details......