just wondering which way to go on the frame of my sedan project. Is there any reason that I should use 32 rails over the stock A ones? I will probably box either one that I use but didnt know if one was really better then the other besides having the reveal in the side? Just trying to see if its worth the extra money..the stock frame I have is in really good shape except for the front crossmember. This is going to be my first(old) project so when done I am going to drive it alot!
Channel or no channel? 32's look good with even an inch or to of channel, any more and i would say no. It's all a matter of preferance and how much cash you want to spend.
sorry bout that im not going to run fenders and probably no to very little channel and "planning" on running hood and side sheilds
nothing looks better than an a on '32 rails imo. i'm putting my '29 tudor on a '32 frame with a small-ish channel (maybe an inch). looks tits if you ask me.
If I were in your same situation, I would opt for the '32 frame. I'm sure I would be kicking myself later for not stepping up and doing it. On the other hand, if you plan to channel it 4'', then save yourself some change and just box the A frame. I just like the look much better sitting on a Deuce frame with little or no channel. Just me, it's whatever look YOU like best.
im building a 31 on a 32 frame... i love the look of it, but i have come to find out that there are WAY to many highboys out there, and not enough full fendered cars... if i could do it all over again i would run full fenders, but thats just my opinion...
I like em done both ways, I opted to stay with the 28's frame and box it and X member it..I wasnt going to channel mine..and i made my A frame very strong..so I stuck with it..plus I went full fender, and wanted to stay with the aprons and all so there wasnt a point for the 32 frame on my build
yeah the extra space would be nice im going to run a 289 ford with a c4 or AOD. kinda leaning toward the 32 rails and using the 32 grille shell. anyone know or have any pics? there are a lot of highboys out there but i havent seen to many pics of 28-29 sedans most are 30-31s. im sure there out there somewhere just have not seen to many pics
I like A highboys on 32 rails, they just look so sexy. You will have to pinch the rails If fully fendered i would keep the A rails.
Check out Will Kimbles Build Thread... Model A Tudor on deuce rails... The Family Hot Rod, or a Poor Man's Deuce Tudor
I like a '30/'31 highboy & fenders on a '28/'29. I'd shoot for something like this with an inch or two added to the visor, a little bit lower in the front, & I'd seriously consider raising the top 1" or 1.5" over stock. JH
No,you don't have to pinch the rails.There were model a on deuce rail hiboys built for 60 years before Magoo started pinching the rails.In my opinion they look more traditional, without pinching the rails.
I would say yes to the 32 rails. I am putting my c/c 28 A pu on 32 rails. There are numerous posts on pinching or not pinching as will as shimming the front of the body if decide not to channel an inch or so. I found the thread belowto be helpfull http://www.jalopyjournal.com/forum/showthread.php?t=440495&highlight=pinching+rails&page=3