need a "custom" tank for air ride

looking for someplace where I can source a tank for my air ride setup.. I need the outside to be about 5 inches in dia.. I can go as large as 6 inches.. but thats it..

length less than 30 inches is all good.

any thoughts?

 

Tubing capped on each end with ports drilled and welded.

 

Hey sawzall, I'm in Phoenixville too. If you're looking to have something made I know a good welder in town.

 

I don't know how much pressure the tank will see but it is over 15 PSI I would use a 4"
dia. piece of pipe threaded on both ends and capped.

 

I may have a tank about 6" by 20 something.
Clark

 

An old fire extingusher