Bubbas Tech Tips for Hamb-ers ???

Thought you all would enjoy this one , some tech-ni-cal tips right from the diagnostic hot line .....rbg :>)

http://diagnosticnews.com/tech-videos/bubbas-garage/



Happy Thanksgiving !!!!!!!!

 

Wow, thanks for the helpful info. I'm sure I will use one of the tips everyday. You've almost inspired me to use my Vantage scope more often! I guess I'll contact you later when it's time to choose a dist. for my '53 8BA. Thanks

 

HOLY COW that was GREAT...
Bubba Logic at it best..

 

bap bap bap bap

 

exceptional insight and knowledge thanx bubba

 

Now I can get Mrs Jalopy's Camry running like new again????
Thanks for the great tips

 

Bubba, you the man!

 

Way to go bubba!!

 

Tighten it down till it squeaks.

 

HAH I love the torque chart.

(I have some overalls exactly like those too)

 

And to think that I just wasted good money on a fuel pressure gauge!

 

Buddy of mine used to check for spark on lawn mowers by pulling the plug holding it , pulling the rope, he always said it has to shock you up to your elbow or you ain't getting enough juice.

I got an old step stool just like the one the dog is sitting on.

 

Thats been a day or two ago.

I love it, Happy Thanks Giving Bubba!

 

addendum to torque tip - we just tighten it as tight as you can get it, then tighten it another half a turn - and your`e there!

 

That was HISTERICAL....Everyone @ the shop is adjusting the BAP guns..........

 

What about Harbor Freight? Think that might be a conversion to Bap, Bap, Bap, Bap, Bap, Bap, Bap, Bap, Bap, Bap!!!!

 

More "Nuggets of Knowledge" than you can shake a stick at!

 

Nice work Jim.

 

Now thats really good - Thanks Bubba.
Man, & I always thought you measured the light bulb voltage by what degree of burns you got on your finger tips from holding it, HA,HA.

 

I've got to write each tip down and have it posted in my shop. Thanks Bubba.

 

Bubbas the best wrench to ever put on da overalls.That fine dog probably minds better and is faster than the rookie under me!!

 

Thanks Jim! Really cool.

 

jim, you...are a mental case

 

tightner down to almost the twistin off stage!

 

"just call Bubba and da dog..."

done good, might have to get a bigger wrench for my magneto, did the test like you said, and threw that other one over the roof and now I can't find it....lucily it was a metric open-ender any how so it won't matter much I suppose.

Cheers,

Drewfus

 

I was told to never pass on those tips 'cause todays younsters aren't capable of comprehending something so technical. Oh well, the cat's out of the bag.

Frank

 

Damn Bubba I'm glad you did this "tech video" sure cleared up some things I have been wondering about.

 

YEP ! ! What Bubba just said !!!!!!!

 

Bubba, I couldn't retain all that, need to talk a little slower.

 

Bubba, I'm caught between some very serious gut wrenching laughing and being V-E-R-Y A-F-R-A-I-D, Happy Thanksgiving!!!