Register now to get rid of these ads!

Does anyone pinstripe steel wheels in New Jersey ?

Discussion in 'The Hokey Ass Message Board' started by bubba67, Aug 12, 2010.

  1. bubba67
    Joined: Nov 26, 2008
    Posts: 1,842

    bubba67
    Member
    from NJ

    Looking to have my steelies pinstriped, any recommendations ?
     
  2. Ed the pinstripper long island 5164332220
     
  3. tires mounted?
     
  4. Steel A Rod
    Joined: Jun 28, 2010
    Posts: 265

    Steel A Rod
    Member

    If you are in South Jersey you can go just over the bridge and use one of the best strippers on the east coast. Paul Quinn - Design Brilliance in Morton ,PA
     

  5. Where in NJ ?
     
  6. bubba67
    Joined: Nov 26, 2008
    Posts: 1,842

    bubba67
    Member
    from NJ

    At the Jersey Shore, Parkway exit 98. Tires are not mounted yet.
     
  7. philly the greek
    Joined: Feb 15, 2009
    Posts: 1,863

    philly the greek
    Member
    from so . cal.

    Too bad your on the wrong coast .
     

    Attached Files:

  8. Drop a line to Mr.J on the HAMB he is up around exit 155 about 1 hour from Point Pleasant
     
  9. chopolds
    Joined: Oct 22, 2001
    Posts: 6,214

    chopolds
    Member
    from howell, nj
    1. Kustom Painters

    There used to be a guy here on the HAMB in "our" area that did striping.
    Caffeine....whatever happened to him????????
    I think he lived in the Old Bridge area.
    I can check my "archives" for some guys that I got business cards from, but I've never used anyone close to home.
     
  10. Busted Knuckles
    Joined: Dec 1, 2004
    Posts: 1,731

    Busted Knuckles
    Member

    00 MACK! nuff said
     
  11. 57JoeFoMoPar
    Joined: Sep 14, 2004
    Posts: 6,146

    57JoeFoMoPar
    Member

    +1. Everybody who sees my car asks who striped it, then says how good it is. His work speaks for itself
     
  12. Slim Pickens
    Joined: Dec 15, 2008
    Posts: 3,343

    Slim Pickens
    Member

    Mr. J is in Paterson. Anthony (00Mack) is around somewhere in North Jersey. Slim
     
  13. RABs32
    Joined: Nov 14, 2009
    Posts: 807

    RABs32
    Member
    from new jersey

    There's Glen designs in edison.
     
  14. bobfromnj
    Joined: Jan 31, 2007
    Posts: 51

    bobfromnj
    Member
    from nj

    ryzart in clark
     
  15. duffy.
    Joined: Jun 16, 2009
    Posts: 78

    duffy.
    Member

    x2!!
     
  16. 40streetrod
    Joined: Nov 11, 2007
    Posts: 477

    40streetrod
    Member
    from nj

    bill egert @ the jersey shore 908-415-6574
    alan johnson northwest jersey -908-362-8719
    glen design's in edison, someone here's got his number

    alan johnson does the wheels of time show in macungie, pa maybe you could drag your wheels up there let him do them while you take in the show.
    or
    buy a brush and a pint of paint, throw them in one of my lathe's and do them yourself. brush and paint = $20.00 + your time.

    i'm in cnj right off the gsp
     
  17. RABs32
    Joined: Nov 14, 2009
    Posts: 807

    RABs32
    Member
    from new jersey

    Sorry I didn't have time to include Glens # got interupted by a call on a set of halibrands I have for someones f/c project. heres the # 1-732-777-2600....Rich
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.