Register now to get rid of these ads!

Need some help with this dash.

Discussion in 'The Hokey Ass Message Board' started by neverliftmotorsports, Jun 21, 2010.

  1. neverliftmotorsports
    Joined: Sep 19, 2009
    Posts: 127

    neverliftmotorsports
    Member

    I got this dash and wanted to find out what it was from. He had it in the back yard and I thougth it would be cool to have in the garage and mabye someday use it. Thanks for the help.
     

    Attached Files:

  2. Mat Thrasher
    Joined: Nov 5, 2007
    Posts: 1,168

    Mat Thrasher
    Member

    33 or 34 ford truck
     
  3. neverliftmotorsports
    Joined: Sep 19, 2009
    Posts: 127

    neverliftmotorsports
    Member

  4. fab32
    Joined: May 14, 2002
    Posts: 13,985

    fab32
    Member Emeritus

    He's right about the application. The cutout for the steering column is not stock however. The stock column bolted to the bottom of the dash where the cutout is.

    Frank
     

  5. neverliftmotorsports
    Joined: Sep 19, 2009
    Posts: 127

    neverliftmotorsports
    Member

    I figured someone cut it out. It looks like the holes on the right side were cut in it for some guages. What would something like this sell for? I am thinking about posting it. Im thinking there might be someone that needs it.
     
  6. tommy
    Joined: Mar 3, 2001
    Posts: 14,757

    tommy
    Member Emeritus

    It's hard to tell from your picture. If the center football with the 3 gauge holes is welded in from behind then it is a 32. If it is one piece complete stamping with no joints around the football then I agree 33-34 commercial.

    If it does have a welded in football, then you will need to measure it to see if it's a car or commercial. Got a picture of the back?
     
  7. neverliftmotorsports
    Joined: Sep 19, 2009
    Posts: 127

    neverliftmotorsports
    Member

    Ill go take it right now.
     
  8. neverliftmotorsports
    Joined: Sep 19, 2009
    Posts: 127

    neverliftmotorsports
    Member

    Here is the picture of the back. Its not welded its stamped one peice.
     

    Attached Files:

  9. tommy
    Joined: Mar 3, 2001
    Posts: 14,757

    tommy
    Member Emeritus

    Ok 33-34 commercial.
     
  10. alchemy
    Joined: Sep 27, 2002
    Posts: 20,522

    alchemy
    Member

    With all those extra holes and cutout section, I'd say less than $100.
     
  11. neverliftmotorsports
    Joined: Sep 19, 2009
    Posts: 127

    neverliftmotorsports
    Member

    Hey thanks for the replys. Thats what I was thinking on the price too just wondering what someone else thought.

     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.