Register now to get rid of these ads!

New guys new ride, 62 Falcon

Discussion in 'The Hokey Ass Message Board' started by garvinzoom, Sep 29, 2007.

  1. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Another update to the old girl, got it tore down and threw some gaskets on the engine and trans and checked the bearings. Threw some paint down, moving the battery to the trunk to clean things up under the hood and putting on a new master cylinder. This was my first time painting with a air gun and I am happy with the results, not perfect but I can learn from my mistakes.

    [​IMG]
    [​IMG]
    [​IMG]
    Got the wife involved! :)
    [​IMG]
    [​IMG]
     
  2. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Also bought a factory radiator to do away with that ugly electric fan and also doing away with the electric fuel pump somebody installed...
     
  3. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    More pictures, slowly making headway. Engine paint is VHT metallic burnt copper, I think it will look good in the white engine bay....I hope anyway. Still need to bleed and install new master cyl. and run brake lines, install engine and trans, move battery and......ughhh
    Need her up and moving by the fourth of June, wish me luck!

    [​IMG]

    Me and my non-OSHA approved dust mask :rolleyes:

    [​IMG]

    Engine getting some love

    [​IMG]



    [​IMG]
     
  4. 63FalconFutura
    Joined: Feb 18, 2010
    Posts: 308

    63FalconFutura
    Member
    from Socal

    0322101709.jpg


    my air cleaner has seen better days haha
     
  5. Artie B
    Joined: Jan 1, 2008
    Posts: 238

    Artie B
    Member

    Was wondering what u had been up too. Engine bay and engine are looking good! I used the VHT Gold metalflake for my new sbc for the chevelle. Keep us informed with the updates
     
  6. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Little scuff and paint would make her fresh again!
     
  7. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Thanks for the kind words! I saw that you were looking at some flaked top options for the Chevelle in another thread. That would look really cool! Did you like the way the Gold came out on your small block?
     
  8. falconizer_62
    Joined: Mar 2, 2007
    Posts: 637

    falconizer_62
    Member

    NICE! Great job and congrats on painting it yourself! I dig the copper motor. very nice work.
    thanks for sharing!
    peace
     
  9. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Thanks Falconizer 62!
     
  10. falconizer_62
    Joined: Mar 2, 2007
    Posts: 637

    falconizer_62
    Member

    still looking to see that air cleaner at home...
     
  11. Artie B
    Joined: Jan 1, 2008
    Posts: 238

    Artie B
    Member

    yeah Im knocking around a few options. I'll post some pics of the sbc soon. I love the way it turned out! The vht paint really covers good.
     
  12. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Soon! :p
     
  13. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Cool, looking forward to it. I thought the paint covered well also. Hope to see you out and about this summer, possibly goodguys.
     
  14. BOWTIE BROWN
    Joined: Mar 30, 2010
    Posts: 3,252

    BOWTIE BROWN
    Member

    I JUST SOLD A ONE OWNER 62 COMET S-22 . YOU GOT TO LOVE EM .
    TECH. TIP ........ DON'T GET DRUNK & FALL AGAINST THE TAILLIGHTS .
    "runnin in the fast lane ..... on a gravel road "
     
  15. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Love them Comets also, sounds nice. I will have to quit drinking around the taillights in the garage. :D
     
  16. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Got the rails and crossmembers undercoated....more work tommorow. Hope to get brake lines ran and engine sat back in at least....

    [​IMG]

    [​IMG]
     
  17. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Okay, got some more progress. Could not find any brake fitting after going to five different parts stores... had three of them try and sell me compression fittings, no thanks! :mad:
    So no brakes but did get engine in, trans in, radiator in and lines rans from rad to trans and linkages installed. Working on header install after my lunch.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  18. falconizer_62
    Joined: Mar 2, 2007
    Posts: 637

    falconizer_62
    Member

    Looking good man. :)
    What color white did you shoot?
     
  19. Artie B
    Joined: Jan 1, 2008
    Posts: 238

    Artie B
    Member

    updates are looking good..here's a shot of the sbc.

    [​IMG]
     
  20. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    It was a Ford color.... I will have to look at the can again.
     
  21. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Looking good!
     
  22. El Coral
    Joined: Dec 12, 2008
    Posts: 36

    El Coral
    Member
    from Argentina

    Loco dejalo asi que aca en argentina tu auto es un coche que gusta mucho

    man so leave it here in Argentina your car is a car love
     
  23. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member


    Gracias!
     
  24. El Coral
    Joined: Dec 12, 2008
    Posts: 36

    El Coral
    Member
    from Argentina

  25. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    Got her back on the road, still some stuff to do but here she is as it is...

    [​IMG]
     
  26. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

    I really want to hide those harnesses, look like crap even loomed up.
     
  27. falconizer_62
    Joined: Mar 2, 2007
    Posts: 637

    falconizer_62
    Member

    looks great! dig it :)
     
  28. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member


    Thanks!!! :D
     
  29. jmh
    Joined: Jun 30, 2008
    Posts: 438

    jmh
    Member

    Checked out your car at Columbus.. Sweeeeetttt!!! Love them tail-lites!! John
     
  30. garvinzoom
    Joined: Sep 21, 2007
    Posts: 1,169

    garvinzoom
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.