anyone know of a book or a dvd out that has ''how to'' or a good instructional how to do interior step by step...looking more for a dvd ..i want to learn the tru tuck-n-roll and diamond tuck.. with deep stitching..thanks
My wife was interested in learning how to do upholstery so she did some research and found someone locally who did 1-on-1 classes. She liked it so much that she decided to go to Wyotech for their upholstery course.
Take a look at a stock model T seat that is diamond tufted...The diamond are all folded and the buttons hold it ..no seams in the diamonds....... Or any antique that has diamond tufting.....even old sofas....
My Old Roadster had genuine folded diamond-tufted upholstery. Always thought it was unusual to be done in the late 60s that way.
You'll find loads of info on the Upholstery Social Group: http://www.jalopyjournal.com/forum/group.php?groupid=174 Here's one specifically on the modern approach to tuck and roll. Very well done and no, I am not looking to get into an argument on what is true tuck and roll. http://www.jalopyjournal.com/forum/showthread.php?t=372599
If you can locate some of the "Little" Rod and Customs (May-July, and September/October 1955), they did a series on upholstering. Colgan's Upholstery in Burbank upholsters a '40 Coupe. In particular, the September issue showes how they used to hand stuff the pleats to get the depth and roundness. I think this technique is pretty much forgotten (Eddie Martinez, who did 3 cars for me over the years, was the last to hand stuff pleats that I was aware of). If you really want to do it like it was done in the fiftie's, pick up a copy of the September 1955 issue. They would sew the pleats with a backing material, then stuff rubber or cotton into each pleat. Again. I think it's pretty much a lost art, as Eddie has retired. I'd be interested to know if anyone does it like that these days- perhaps Sid Chavers or Tom Sewell still does- I don't know
I buy channel foam with V grooves cut into the foam. You can get different widths , 1inch ,1 1/2, 2 ect... It gives a fuller look. You lay the vinyl over the foam, follow your finger down the groove and sew. Fold the vinyl over and sew next to your first stitch (like in the post above). Just repeat the process. It takes awhile getting used to, but looks great.
I'm trying to get Dean Jeffries old Porsche ready to go by March and its time to turn to the interior. It was originally done in hand stuffed tuck and roll by Eddie Martinez but its gotten a bit shopworn over the years so I need to recreate exactly what Eddie did. It looks like the pleats were originally stuffed with either 3/8" or 1/2" thick foam around 1-3/4" wide. My question is what foam should I get for stuffing the pleats - I'm thinking a medium firm foam but I was wondering what number and where to get it. Any advice on true tuck and roll will be greatly appreciated.
Stu: Are you still around? I wanted to pick your brain on Tuck N Roll...You seem to know your stuff. I've been doing what I believe to be Tuck N Roll and want your opinion.