Another 700r4 question-sorry!

Hi, I have just installed a reconditioned pump in my 700r4 and realised after fitting it that there is no hole for the transfer tube to go into<?xml:namespace prefix = v ns = "urn:schemas-microsoft-com:vml" /><v:shapetype id=_x0000_t75 stroked="f" filled="f" path="m@4@5l@4@11@9@11@9@5xe" oreferrelative="t" o:spt="75" coordsize="21600,21600"> <v:stroke joinstyle="miter"></v:stroke><v:formulas><v:f eqn="if lineDrawn pixelLineWidth 0"></v:f><v:f eqn="sum @0 1 0"></v:f><v:f eqn="sum 0 0 @1"></v:f><v:f eqn="prod @2 1 2"></v:f><v:f eqn="prod @3 21600 pixelWidth"></v:f><v:f eqn="prod @3 21600 pixelHeight"></v:f><v:f eqn="sum @0 0 1"></v:f><v:f eqn="prod @6 1 2"></v:f><v:f eqn="prod @7 21600 pixelWidth"></v:f><v:f eqn="sum @8 21600 0"></v:f><v:f eqn="prod @7 21600 pixelHeight"></v:f><v:f eqn="sum @10 21600 0"></v:f></v:formulas><vath o:connecttype="rect" gradientshapeok="t" o:extrusionok="f"></vath><?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o:lock aspectratio="t" v:ext="edit"></o:lock></v:shapetype><v:shape style="WIDTH: 12pt; HEIGHT: 12pt; VISIBILITY: visible; mso-wrap-style: square" id=Picture_x0020_1 alt="0" type="#_x0000_t75" o:spid="_x0000_i1025"><v:imagedata o:title="0" src="file:///C:\DOCUME~1\KATIEC~1\LOCALS~1\Temp\msohtmlclip1\01\clip_image001.gif"></v:imagedata></v:shape> I thought the replacement pump was identical as the old one as the parts i tranferred fitted fine and both are the ten vane type. So my question is- Do i need to run a transfer tube? <o></o>
<o></o>
Steve.<o></o>

 

Hi, Not sure why text got all messed up! Can anyone advise on whether or not i need to run a transfer tube? Thanks.

 

No, plug it off at the pump.DAVE

 

OOPS, I read it wromg. If you have a later style 700R4 (87 up) w/ an aux valve body you must use the tube. DAVE

 

Hi Dave, Thanks for your reply. The rebuilt pump i have has a plug very close to where the transfer tube should go. If i removed this plug could i use the hole for the transfer tube? I appreciate your help, Thanks again.

Steve.