Changing jobs left me without a stall to work on and finish my model a. I have a few things that need to be tied up before it will be roadworthy. I'm seeking out a shop that can do 1-2 full weeks of work for me, in the near future. Let me know, email or pm.
Tim Gangle and crew at http://www.hotrodhardware.com are just west of Rochester. Titus is in the cities.
Have you picked up a hardcopy of Hemming's Motor News yet? The "services offered" section is FULL of shops.
What kind of work do you need done? I have a couple shops in mind, but want to make the right recommendation.
PM Cheater Carl - His shop is in south Milwaukee and he knows his shit. Here's an example of his work. http://www.jalopyjournal.com/forum/showthread.php?t=395968
yeah what kind of services are you after ? paint and body , mechanical , electrical ? etc. looking for a full range shop ? or just certain things that need to be performed
Car is a 31 model a, car is unchopped, channeled width of frame, traditional front end, ladder bar rear suspension. I'd consider it about 85 percent complete to driver status. Some things that need to be done... Headlights mounted Radiator mounted Grill shell mounted Fuel line ran Brake line from master cylinder to front drum brakes ran Motor and gauges have been wired.. Need wiring completed to headlights, and taillights, maybe some other misc wires ran Floor is only tacked together. I need it fully welded, and piece of 18 guage for the driveshaft tunnel bent and welded in It has a crate motor (sbc) that is all together, but has not been fired. . I need new plug wires cut crimped and wired. One problem that has haunted me the whole build is the frame possibly being high on one side, (left to right) Fluids filled in rear end, tranny, and motor, driveshaft bolted in Suspension alignment needs to be done. That is the basics of what needs to be done. The car has sat for the last 6-8 months because I changed jobs, and the landlord is very strict on doing any work out of my rented garage unit. My photobucket account with pictures of my project can be found at: http://smg.photobucket.com/albums/v203/midwestmuzikk/1931 Model A Tudor/ and http://smg.photobucket.com/albums/v203/midwestmuzikk/Crate 350/ <o>> </o>> Notice there are 10 pages of pictures in the first link. I would like the car to be roadworthy, I would like to work out the bugs myself.
Thanks Casey, you are a gentlemen and a lady! As Casey has mentioned, have a "shop" in South Milwaukee, I can work on your car, PM me or call 744-5420. You can visit the shop. Sincerely, Cheatercarl
Tin Man Fab in Oak Grove is really good. Great guy, awesome work. www.tinmanfabrication.com Owner is Jim Crews
RCNut, DO you mean "Rod's Plus"? it was on the frontage road by I-94, before that it was on Golf road for a while & before that in Sturttevant or however you spell it. It was owned by BOB FRANK, he now works for JW Rod Garage in Belgium, WI. Good parts, good prices, Bob is a really nice fellow & great open mouth kisser. Sincerely, Cheatercarl
Thanks everyone for the suggestions, I've contacted most everyone listed here and through my PMs. If I havent PM'd someone, go ahead and shoot me a message.
http://www.vescioscustomizing.com/ in Rogers, MN is another one. Don't know them personally though. Just driven by.