How many have Caddy mills in their rides.

I had a '55 331 in my '27 RPU, Have a '63 429 in my '63 GMC Suburban, I have a '49 1/8 over 331 (355) that WAS blown 'n injected in my gasser now waiting to go in something else. Oh, and another '53 331 for? Yes, I like Cads!

 

the 390 that I put in my roadster runs like a raped ape..What a great motor. I am sold on the Caddys. Scored the cool 6x2 intake here in the classifieds.

 

I've got a 500 in my avatar and a 472 in my 47 Chevy, a 500 in my 76 Eldorado and 3 500's in the basement.

 

I have the good ole' 472 in my 53 Poncho! (avitar car)

 

By doing a search of the classifieds on here, $200-$400. Maybe a bit more if you sell it with all the accessories.
I wonder how that would work in a '27 RPU?

 

500 Caddy here as well.
It is in My '49 Lincoln Coupe.
see avatar..........


.

 

Merline we need pics of this blown injected Cad mill. Were a visual group

 

I haven't got it dialed in yet. It start's right up, Idles great but starts missing and backfiring at about 3000 rpm. Like its running out of gas. I'm looking into the high speed circuits on the old 97s.

 

Dropping a 331 and Hydra-matic in my '27.My first rod.

 

I have a 390 on the floor. Maybe it'll go in my 36 coupe. Both are on the back burner.

 

I have one in my '65 Caddy DeVille.....it's for sale. But not on here. It's WWWWWWAAAAAAYYYYYYY too new for this awesome place.

 

I cannot stop laughing.

Last 3 threads I have looked at you've been hammering the age thing...

HAHAH!!!

Love it!!!

"Hope there aren't anymore '65's or newer. They aren't cool enough for this board. The mods said so."

"A traditional car CANNOT BE NEWER THAN 1964. PERIOD. Cars are not sool if they are 1965 or newer. The Jalopy Journal says so. The end.
Rat Rods rule the face of the planet. Just look at all of them on here. "

"I have one in my '65 Caddy DeVille.....it's for sale. But not on here. It's WWWWWWAAAAAAYYYYYYY too new for this awesome place."


WWWWWWAAAAAAYYYYYYY too cool dude!!!

HC.

 

Just lucky the cutoff doesn't include the members......hell, half the population o n here is morons that watch to much tv and justgot their driver's license. They'd be way to not-old-enough to be here.

 

a little heavy on the sauce today? If you don't get it you don't have to be here.

 

That's what I'm told....even though I've built cars from scratch......

 

I have a 425 in my 48 F-1. It replaced the 472 that seized up 6 years ago. Both good motors. Early valve covers with an adaptor I found on ebay.

 

Love the look of a caddy motor and the way the run there ,s nothing prettier then a caddy motor in a old ford body beats a dress flathead or the everyones has or whats a hemi

 

have a 346 flatty in my stude phaeton. all i see here is ohv motors

 

I got a 365 on here for my 46 Coupe it is on a semi back burner while I rebuild my 327. I also have 1 -500,2- 472 and 2 -425.

 

I do, I do! 472 in my '36.

 

My friend Charlie has one in his '51 Merc.

 

This came out of a 32 3wd that was on the cover of motor trend in 63. It is going into my 35 3wd. Love Caddy motors!!!

 

Mine's a 322 for my 27T roadster. For nitpicking's sake, it's a La Salle.

 

Anybody, besides me, have a 35 or 36 Ford (car) with a 331, 365 or 390? I could use some pictures to refer to. Thanks

 

I have 500 in my 41 Caddy and a 500 thats slated for my 69 Chev panel.

 

Nope, have the 331 mill , just haven't found the car to put it in

 

I was hoping you knew what you were doing.

 

Man thats pretty.

 

If you dont mind my asking, how much did it cost to ship? Guess you had to get the shipper to put it on a pallet?

 

Here´s one in a 35 roadster. It´s getting realy tight but it will work. Putting one in my 36