Well, with over three million posts, perhaps we should accept that all the tech questions have already been asked, archive the forum and just have a "social chat format"... Frankly, searching for stuff on the internet (and the HAMB at times) can be a PIA because of TOO MUCH information. Searches work great on obscure cars and subjects, like my 55 Lincoln for example, but the searches can be overwhelming for more common discussion subjects, and almost too bothersome to weed through. Sometimes after playing with hundereds of threads returned on a search I say screw it and just ask the question even if it is bound to piss someone off. "welder" "110V" 162 threads returned on this search, each containing posts to go through... This search might use the keywords to get the best answer and maybe not... See where I am headed... My .02 on searches...
Lincoln SP135+ Runs off a standard circuit, but for anything thicker than exhaust (1/3 welder power) you'll want to shut off un-necessary electrical items on the same circuit. Tremendously useful tool. I've done floorpans, frame repairs, made a trailer, etc. Heck, 10 minutes ago I was using it turn a piece of chrome tubing into a closet hanger rod by welding tabs onto the end. Frankly, with this thing set real high, I don't have a lot of use for a 220V welder. At least when talking general purpose auto stuff. I don't deny 220 is superior for heavy stuff, but getting the job done is different than "the best" When you buy, poke em for a sale price. A lot of those welding places go to trade shows and offer a special deal with a free cart and gloves thrown in for base welder price. Just go ahead and buy a gas cylinder when you're there. When it comes time to step up to 220, you'll be ready to add TIG to your capability. good luck
WOW! I had no idea I would get this much of a response. Thank you all for the advice, I will definitely be doing some more research based on the opinions and thoughts of all you. THANKS ONCE AGAIN!
I say Miller or Lincoln, I have owned 2 millers, but have used lincoln machines in class, you cant go wrong with either. Don't know what ya plan on doing but if your gonna do frame work get a 220, although some 110's can weld frame material, it still seems sketchy to me. -----Check craigslist!!!!!