Just wondering if anyone can give my some info on installing door bumpers like where they go and how they are attached
Nice looking ride... on your sedan the bumpers are attached to the frame via 2 L shaped mounting arms (extending 14.5 inches) and those are bolted on with FOUR 1/2-20 X 1 1/4 BOLTS, WASHERS AND NUTS. Restoration parts suppliers have these available for about $60 (US) for arms, and $250 (US) for the actual blades themselves. You may need clamp backing plates and covers (polished/chrome) as well depending on how you buy parts. Hope that helps...
Thanks Mike for your reply it did help and I ended up with them back in the right spots, the car is gold now with just over 6000 miles on it. Shawn