My name is Curtis George, ive been a student at Hot Rod Institute since June 2008. Im currently in the Chassis Fabrication class and have been working on my 49 F-1 frame. So far I've put a Heidt's Mustang II IFS kit on and on the rear I used a Ford 8.8" with a triangulated four link kit from Welder Series. Most of the welds on this frame were done with TIG. I am planning adding a K or X member after i get engine and trans, but will be a while before that happens due to funds. Plan on putting a 351W with a Tremec 5-speed in. I will add more pics when I get into Body Fabrication. Here are a couple pics of what I have been doing: Chassis before I began Frame at ride height Frame boxed for Mustang II crossmember Mustang II Rear End: C-Notch Triangulated 4-link For more pics click here: http://s487.photobucket.com/albums/rr240/Ford49-67/ I hope the pics turned out ok and I look forward to hearing what you guys think.
This truck is pretty much encompasses everything I hate into one vehicle. Triangulated four bars, what do you think your doing. You deserve to be kicked in the teeth. I mean what you trying to prove kid. Nice work BTW
I think I've seen that project somewhere before from the pics in your album?!?! It has to do with the original front axle I have!! Welcome!!
Hey, great work! Thanks for using our four link kit. I think if it was my truck I would box in the upper frame brackets because of how long they need to be for your truck... just a suggestion. Please let me know if there's any other parts we can help with! dw