Source needed for Stovebolt int/ex studs

Anyone know where I can get some intake and exhaust manifold studs? I also need the 2 studs for the exhaust pipe on the bottom of the manifold.

THanks
Justin

 

I usually just make my own. Take the right size bolt and just cut it off and clean up the threads.

Unless you are talking about the studs that are smooth and have no threads. Then I would call my local machine shop and see if they have them.

 

Parts store. They're available in many sizes, lengths and thread pitches.

 

Try Ace Hardware,got mine there.

 

We had an Ace Hardware nearby but it closed down when Home Depot and Lowes opened. The Ace had an excellent hardware section . The HD and Lowes hardware sections suck.

 

Tractor Supply