All, Looking for good motor shop in Dallas that will help me with my hemi rebuild. Hot tanking, decking, boreing, and etc. I read Bass post about a Dave Pluebell but no phone number... thanks in advance -Junior
I am currently having Dave Pluebell do some work on my 291 DeSoto Hemi. Very kool guy to speak with and do business with. You would be impressed with the set up he has. See what I can do about passing a number to you
Dave fixed my Studebaker motor after Wayne Calvert fucked it up on a simple rebuild. He also built my 383 Stroker motor. He has my endorsement DP Machine (972) 840-2242
When you have the crank ground, grind the knurl off the main where the rope seal goes. Use the rubber seal used in most rebuild kits.
sorry flat black. wayne calvert did the machine work on my red ram. and he has done all of our race engine machine work for 15 years. my family has never had a problem with him, so if you ask me, go see wayne.
Wayne did my last motor and it turned out great (stroked Mopar 360 to 408). Piranios moved to Denton. Some investor is buying up downtown Celina.