Register now to get rid of these ads!

Looking for custom taillight ideas: '57 F100

Discussion in 'The Hokey Ass Message Board' started by Humboldt Cat, Aug 24, 2007.

  1. Humboldt Cat
    Joined: Feb 20, 2003
    Posts: 2,235

    Humboldt Cat
    Member
    from Eureka, CA

    Been planning on getting some old taillights to recess into the rear fenders (the I-beam bumper's being replaced by the bottom 1/2 of a '65 Tbird front bumper), looking for some ideas. Saw some early-Pontiac (1950-ish) style taillights at a swap meet, wishin' I'd gotten them.
    Any ideas?
     
  2. southdiver1
    Joined: Aug 23, 2007
    Posts: 182

    southdiver1
    Member

    Well, it's not a very good pix but, the bottom light might look cool along each side....
    [​IMG]
     
  3. eviljake
    Joined: Aug 18, 2006
    Posts: 83

    eviljake
    Member
    from Austin, TX

  4. eviljake
    Joined: Aug 18, 2006
    Posts: 83

    eviljake
    Member
    from Austin, TX

    If you can find them, 57-60 panel truck tail lights look pretty good.
    [​IMG]
     

  5. Doesn't the 'bird have indicators in the bumper? or are you using them for reverse light?
     
  6. HMH INC
    Joined: Apr 13, 2007
    Posts: 71

    HMH INC
    Member
    from RALEIGH,NC

    59 cads recessed always look pretty good, I found some 49 merc's on ebay and put them on my 53, fit the contours perfectly. I realize the 57 is very different but if you just did a search on ebay of say, 49-63 taillights it would probably give you some ideas of styles and the like. I have about 40 or 50 issues of the little car mags from the late 50's to early 60's and that's where I get most of my ideas. I don't recall seeing any 57's but if I find one I'll give you a heads-up.
     
  7. Revhead
    Joined: Mar 19, 2001
    Posts: 3,027

    Revhead
    Member
    from Dallas, TX

    If you are just looking to put different lenses int he existing holes, look at late corvair tailights, I think they are almost identical in size
     
  8. Corvette64
    Joined: Jul 22, 2007
    Posts: 98

    Corvette64
    Member

  9. Phil1934
    Joined: Jun 24, 2001
    Posts: 2,716

    Phil1934
    Member

  10. Section 8
    Joined: Mar 22, 2007
    Posts: 1,050

    Section 8
    Member
    from AZ

  11. Toymont
    Joined: Jan 4, 2005
    Posts: 1,381

    Toymont
    Member
    from Montana

    Don't have a picture but the top half lights off of early Intenational Travelalls look pretty good rcessed in other truck fenders
     
  12. Humboldt Cat
    Joined: Feb 20, 2003
    Posts: 2,235

    Humboldt Cat
    Member
    from Eureka, CA

    Toymont, lookin' at Travelall taillights on a search engine, is there a year yer thinkin of? Lookin' at a '73, not too bad, could be slick. Thinking more circular or triangular. Great ideas, guys.
    For the T-Bird bumper, gonna run rectangular exhaust tips out where the turn sig bodies were.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.