Updated HAMBANDY build list...Aug22

Hey everyone,

I was asked by some of you to get a new thread going that was not so long winded. So here is the list and i will add to it the parts still needed.



So here we go.................................... with the already offered goodies.

Doc. for the wonderful model a that Andy is now the proud owner of.

And this could not happen with out some of Andys new friends who has kicked in to get this to happen.

Shane T* Brookville dash/gauge
OldCarmike* Will sew the seats
OLDBEET* Glass
wannaB* Materials for seats
Chuck Speed* Gauges
Barz51* the 94's
PRIMERDAVE* early kh wires
hot rod artist* rebuild and set up carbs on intake
Jrblack30* offy superdual and cleaners
DrDano* rebuild any electrics
Crestliner* flathead headers
dickster27* wire harness carb parts 39 lenses/gaskets
Tim Brown* altenator and flattie adaptor
atch*dropped axle
raven61*posie spring
t-bone*39 tail lites
LUX-BLUE*hood (Andy wants to be able to have the option)
kwiksilver*column/wheel/arms/lites
G V Gordon*fuelblock
Kustomman#1*head lite stands
53chevy*peeps and kh caps
Dougan*steel 32 grill shell
Deano*banner for the dash signatures
Brokenspoke*shockmounts
Rodsnhawgs*pete and jakes front shocks
Bulletnose*plugwires e-brake lever and gas pedal
shifty-shifterton*front spring and rear hanger.
Areo46chevy*black satin paint
Kiwi Kev*sweep tach
53Chev*so cal ignition and assorted stuff
raven61*master cylinder
hot rod artist*chrome fuel reg and header gaskets
harrison*kingpins and stops



Please keep your fingers crossed for Andy. He is USA bound for surgury this Saturday.

 

What does he still need?

JH

 

My end left today headed towards Andy!!

 

A old sweep style Tach
Dizzy for the flat head.
Rad overflow tank...
Heads
Beehive oil filter
Insert for 32 shell
Switches and ignition with keys
etc, etc,etc

 

Aero46chevy from Canadianrodder is in for the paint!!

 

PM me an address where to send a tach, I just got one at a yard sale. Now it's Andy's!

 

I've been slackin. I got the stuff together and will ship them out Monday morning with other stuff that might be needed. Can't wait to see the finished Hot Rod! Get Em' Andy!!!!!!!!!

Ken

 

Hey! I have a SoCal ignition switch and key, brand new and never used, I'll throw that in there too!

Ken

 

OK guys I sat down and made a list of parts that will be need for the build.We are still doing our homework on a gearbox and not sure which way to gther then that we have nailed down a list of parts.


Front spindles (Ford)
King pin hardware
Shackles to mount front spring
front spring perches (Spring over)
front flex lines
front brake parts(drums,backing plates,shoes,etc)
Tie rods for drag link
mufflers
gear box parts??
drive shaft parts (yoke to gearbox)??
transmission mount??
Shackles to mount rear spring
Rear spring mounting brackets
rear shocks
Rear shock mounts
gas tank
master cylinder
hand brake
brake fittings
lug nuts
9 inch ford rear end parts (drums, brakes etc)
rear radius rods or ladder bars
Flattie parts
• Carb linkage
• oil filter
• plugs
• Radiator
• Radiator hoses
• Header flange gaskets
• distributor
• intake gaskets
• clutch/pressure plate
• fuel line

If you feel I over looked anything please let me know.

fitzee

 

I believe the carb linkage is already on the intake/carb set up.

Thanks for the list Fitz

 

I cant really add parts from down here but I can send some posters for upcoming shows down here in Perth. Is this something that he might like on his wall? If so someone PM me an address ans I'll send them.

 

I have a brand new master cylinder that you can have.
r

 

could not find the other end of the linkage I took off my coupe ?
Im shure it will show up after the new linkage from speedway gets here will send the set up next week! I do not have a intake gasket . but I did find a nice crome fuel pressure regulator I will throw in, you only want 2-3 psi.
and I have the header gaskets ,they will be in the box.

 

Update from Chris.....................

Hi Everybody, we are in the hotel. Long trip for Andy. We controlled the
pain with Morphine and he did good. So I guess its on to the next step.
Testing starts on Monday at 7:45 and it will be for the whole day. He will
rest tommorrow.I will keep you posted. Thanks Chris

Keep your fingers crossed and your thoughts with Andy, he has a big ass fight on his hands. Time to kick the crap out of this tumor once and for all.


Leon

 

Not sure if anyone saw it, but there is a small write up in the new Rod and Kulture mag about the HAMB lending a helping hand for Andy. Way cool.

 

Stay positive Andy cause you have one hell of a bunch of great folks watchin' your back. Good luck with the tests Little Buddy.

 

Thanks to everyone who sent parts to the H.A.M.B drags, and as well to every one who signed the dash.

Watch for Andys updates.......tests began today, surgury in few days. As well the model a should be here for Friday.

Leon

 

Got the linkage on today I think Im done now what do I do with it ?
it look`s fast !.....

 

You have a pm.

HArrison is in for the kings and stops.

More wonderful parts arrived today and parts from joplin will certainly make this project awsome....especially the signed dash, your personal touch will add character and remind all who see it how fuk'n great hot rodders really are.

Leon

 

Sweeeeeeet!! that set up will make Andy`s day. Leon has been showing me the parts as they show up and I must say old parts down there and nothing like the stuff I`m use to. Leon showed up today with a pic of the dash so I had to post it on the wall in the shop for all to see. You guys Rock!

fitzee

 

Have you seen the stuff I sent yet...I hope?

 

Yes showed up a few days ago.Great stuff and in great shape.The box is nice peice.Oh cool drawing of hambandy on the box.lol

 

Hey guys...
I have the front axle here at my place now to disassemble, then reassemble to the dropped unit once it arrives.
We're short a couple of items....figured I'd ask again if someone has them to donate before we order the parts from Speedway. (Trying to keep out of the Hambandy fund if at all possible!)

1) We're short a set of perch bolts to hang the spring from on the dropped axle.
2) A set of front shackles and bushings to fit the front spring. (I'll ask Fitzee to measure the bushing Diameter and spring width just to be absolutely sure on that stuff.)
3) A set of perch bolt shockmounts would save some fabrication as well...but if not we'll make something up ourselves.

I'd personally like to thank you guys for sending some GREAT stuff up to Andy for this build.
I finally had a chance to look at some of the parts...just incredible what you guys have sent already!
Andy is gonna have one cool little Tudor!!!

Anyways...the build will go on with or without donated bolts etc...just figured I'd ask in case someone had a set they're tripping over or what not...

Thanks guys!

 

Are there any pics of Hambandy's sedan build yet. Just a thought maybe start a build thread. Ive been trying to keep up with it all but always seem a couple steps behind. Im pullin for ya Andy.

 

I'm building the coulmn drop as we speak. It has an 1 3/4" Dia. coulmn hole, and if it needs to be bigger, I need to know the size ASAP!!!!!!

I'm about to do a machineing operation that will make enlarging the coulmn hole VERY difficult to do after the operation is done.

Please get back to me ASAP at (805) 234-6756.

Eric

 

I'll chip in insulation if its needed.

 

Just spoke with Eric................ Man, hot rodders are awsome! Andy will be super stoked when he sees that drop!

And Lobucrob, that insulation would be awsome.

Leon

 

I may be too late, but has anyone donated assembling the chassis? If all the parts are there, I've got a jig table and a tig welder just waiting for it all.

 

Hey Leon.... Just checkin if those smithy mufflers got there... I see mufflers still on the list, so you might want to upgrade the list so no one else sends a set.......... Big Dan

 

Hey Dan

Thanks so much...............those smithys arrived Thursday.


Leon