Technical Trying to ID master cylinder on my old race car

I'm trying to ID the master cylinder on my old race car so that if and when I get it apart and can't rebuild it I can find another. It's 1 and 1/8 bore and is aluminum and is made by Wagner Lockheed and says Made in the USA on the side. Any help would be appreciated. This is in a modified Roadster (altered)that was built in the late 50s to early 60s .

 

Airplane parts?

 

jeep cj2a?

https://www.thecj2apage.com/forums/late-style-master-cylinder_topic18440.html

 

Well that's exactly it a Willy's / Jeep master cylinder from about 1950 to 51. Thanks all I'm going to try and see if I can locate some parts if this one doesn't come apart after some soaking

 

Brian, you might think about having yours sleeved to a smaller size, like 1" for better braking. Just a thought.

 

i may be wrong, but the first thing that came to mind was the mico master cylinder. they were very popular in the '70s.

 

Check this out at Napa....or google Wagner Lockheed master clyinders.

Napa part NMC M3081

Brake Master Cylinder - New NMC M3081 | Buy Online - NAPA Auto Parts (napaonline.com)