1955 Dodge 270” Hemi engine with rare Offenhauser 3x2 aluminum intake, not the repop unit, and chrome embossed valve covers. 80% of the parts you need are there, machined, cleaned, almost ready for you to complete the build. As most of you know, machine shops are super busy and months behind in finishing up work. Most of the hard work is done for you so take advantage of this deal. I prefer pickup but will ship on a pallet. Here’s what is included: - block machined magnafluxed, bored .060” 6 of the 8 cylinders sleeved. - heads tanked and magnafluxed, complete w/ hardened valves, springs, guides. - Main caps - Intake valve size 1.84” - Exhaust valve size 1.50” - Rocker assemblies cleaned & reconditioned ($500) - Camshaft & cam gear are used stock pieces, cleaned but needs to be turned. - clean straight oil pan, oil pump - Connecting rods - Spark plug tubes - crank pulley - water pump housing & used water pump NOT INCLUDED: Crankshaft, pistons, carb, distributor, gasket kit
I was planning on selling as a complete package, but due to low response, I will be selling each item separately. 1955 Dodge 270” Hemi bare block w/ main caps $1500 - block machined magnafluxed, bored .060” 6 of the 8 cylinders sleeved - heads tanked and magnafluxed (complete w/ hardened valves, springs, guides) -Intake valve size 1.84” - Exhaust valve size 1.50” $750 for the pair of complete heads. -Rare Offenhauser 3x2 aluminum intake, not the repop unit $500 - Rocker assemblies cleaned & reconditioned ($400) - Camshaft & cam gear are used stock pieces, cleaned but cam will need to be turned. $150 - clean straight oil pan, no holes or rust. $200 - Connecting rods $150 - Spark plug tubes, clean & straight $150 - water pump housing & used water pump $150 PM me and we can discus shipping options and cost. 80% of the parts you need are there, machined, cleaned, almost ready for you to complete the build. Most machine shops are super busy and months behind in completing work. Most of the hard work is done for you so take advantage of this deal. I prefer pickup but will ship on a pallet.
UPDATE 10/25/2022: Bare block w/ main caps $1250. Will ship on small pallet via Freight - Rocker assemblies cleaned & reconditioned $400 - clean oil pan w/ a couple of small dings, no holes or rust. $200 - Connecting rods $150 - Spark plug tubes, clean & straight $120 - water pump housing & used water pump $150
UPDATE 3/28/2023: Rocker arm assemblies and connecting rods have been sold. Still available: Engine block and main caps Oil Pan, spark plug tubes, water pump housing.