I has Ford 40 4” x 16” in fronts and think I will use the Firestone 4.50. Rear I found here one Lincoln 5” x 16” but seller said it was a Lincoln but to my knowledge thet had 3 clips but this has 3 knobs. ( he said some Lincoln had clips, some not ) but I think its a Merc wheel ( se pic ) Cool to has a Lincoln but the one I got match the fronts better. -Any idea what wheel I has ( as I need a other one ) If anyone has a nice wheel over = post me. I will use 7.50 Firestones. -Yesterday I learned a new thing... revese the rear wheels. I think its was cool look ! My style is late 40’s. Any ideas ?
G'day Hank, Look like 4 knobs on the inner hubcap edge from here. Also raised edge on the bolt holes and i might just have one here at 5 inches too , just like yours. Heavy for postage are,nt they .
Ok so the one I has is a Ford truck wheel ? Year ? Yes rised edge on bolts ( my fronts has not that ) Was all 3 hub caps bulbs or had some 3 ? The one you has is it indentical ? I will use hubcaps but are not shore. Did the guys back then used truck wheels at rear, and revesed ? One bad thing revesed is wheel goes out near 1” from body than std 5” set up.
Just made these photos. See the yellow arrow , 4 hubcap knobs. Show us your wheel with 3 hubcap knobs.