Hot Rods Black oval shifter boot/em brake

I need to buy 2 black oval trim ring and boots,only place I see selling them is amercian shifter,isn't that Hoffman corp? Any idea?

 

Pretty easy to make your own.

 

Lokar has them, Summit racing, some Jeep parts dealers have a dual boot .

 

you want to make me 2 ?

 

When you go to the catalog the don't show they have them? Summit or lokar? What or where are you looking?

 

https://www.jegs.com/i/Lokar/625/X70-EHBF/10002/-1?gclid=Cj0KCQjwkruVBhCHARIsACVIiOy9J_IQjOZxzIQRJddmMYlKy4CPDsPZRnixZkcfJ7lmAkR_hi89dBMaAnQKEALw_wcB

 

Only ebay shows with no dimension

 

I saw those

 

For that piece, unless you are boycotting the Hoffman group, I’d probably buy it. Worst it could do is come apart over time, but not be a safety issue.

 

When you punch in the lokar number doesn't show the correct one.

 

Try X70-EHBF

 

I ordered one of those in stainless,but the boot was made wrong and too small.

 

Do you think there is only one supplier for the boot?

 

Usually I'll take any opportunity to Poo Poo The Hoffman Group, but there are no moving parts on those, so it might be worth a chance.

 

I just googled oval shifter , brake boot and they come up . Pics show Lokars shifter with the oval ring like you want. Summit in its google ad.

 

Okay the exact thin oval you want is on eBay, summit and speedway. Part number you can google , 70-EHBT is stainless and X70-EHFB is black these are under eBay and Summit.

 

Lol that’s what I was thinking but question the quality of the boot, though others may be relatively the same.

 

Speedway Motors

 

Thank you,It came up this time when I googled it,but not before.The boot was what didn't fit on my speedway one hole was 1/2 inch but the spec sheet said it was 3/4.I called them on thurs and talked to them,they were supposed to call me back fri,never heard from them.

 

Late ‘60’s early ‘70’s MoPar’s 4 speed cars without a console had an oval chrome trim ring and boot. I have a newly chromed trim ring that I paid $80 to have re chromed!!!

 

I had a fab shop cut me 10 of those out with the holes in a different location. The holes that hold it in place hit the E-brake mechanism. I moved them a skosh, so they fit better. I just paint them to match the carpet and counter sink the holes. I custom make new boots to also match the carpet

 

Any good trimmer can make you a boot for that , just tell “em” how tall !!!

 

And as the Rolling Stones once said, "Paint it black..."

 

Late 70s Ford 4x4 transfercase shifter boot ring is very close