Hot Rods New Walker Radiators

Yogie's has these radiators in stock.
1. WS-40 Fan Shroud 20" High x 21" Wide
1. C487-2 1930-31 ford Car& Truck Cobra Radiator
1. Z567-1 55-57 Chevy Car Z-line Radiator
1. C507-1 41-46 truck Cobra Radiator
1. Z495-1 37-38 &39 Standard Ford car Z-Line Radiator
1. C481-2 24-27 Ford Car & Truck Cobra Radiator
1. CAC511-1 47-55 GMC Truck Cobra A/C Cool Mate Radiator
1. Z497-1 1939 Ford Deluxe & 40 Ford & Merc Z-Line Radiator
1. ZAC513-1 46-48 Chevy Car Z-Line with A/C Radiator
1. ZAC567-1 55-57 Chevy Car Z-Series A/C Cool Mate Radiator
1. ZAC503-1 39 Chevy Car Z Series A/C Cool-Mate Radiator
1. ZAC535-1 49-54 Chevy Car Z-Line with A/C Radiator
1. ZAC556-1 53-56 Ford Truck Z-Series A/C Cool Mate Radiator
Yogie"s Phone Number 800-373-1937

 

I Missed one They have a new 32 Ford Radiator in There Show Room Display for sale, No box but new.

 

I bought the one for my Buick a couple of years ago when I was mocking up the front end. My 34 Ford project came with one the previous owner had bought. So, I was lucky. Can't beat the quality of a Walker Radiator!

 

Thanks for the info. I have a Walker radiator in my 47 coupe, great product!

 

Yogi’s handed these out years ago, I must have gotten this at the SR Nats back in the 1970’s.



Too bad he doesn’t have any Deuce radiators, I could have gotten a $1.00 off!

 

I hope this helps someone find a Radiator for their build.

 

Good info. I got one for a 40 from speedway about a year ago just in case--still in box in the attic along with other 40 stuff in case I do another one. Too many parts being discontinued.

 

I went online. Shows they have only 3 left! The power of H.A.M.B. maybe has sold some radiators already ? ? ?



Better give Yogi's a call to verify.

 

They didn't have all of them listed, if you need one of the Radiators on the list call them.

 

Wish I could have found a brass one that would cool my car....I have a two row aluminum that has inch and a half tubes....Would need a six row brass one to do the job...

 

Bump

 

True. I used a Walker w/ a 355 sbc and had a hell of a time getting it to cool-did all the right stuff, shroud, fan, etc.etc. Later on I used a cheap alum. version off ebay for a 350 in a 55 chevy. Motor was worked over, should have ran hot-the alum. rad did the job easy with few mods. Just more efficient. Its a throwaway but now its over 7 yrs. old and still truckin'.