Technical Anyone have a part number for ignition switch with start that fits a Model A dash panel?

Posting to see if anyone has a part number or has ideas for a "modern" ignition switch (Off, assessory, start) that will fit in a stock Model A dash panel. The ones I got are too large and don't fit in the gas tank cavity. I'm using the cowl tank so cutting the tank is not an option.

If there aren't any available, I'm considering using a momentary switch under the seat riser to use as the start function.

Thanks,

 

I have been into Model A's since 1962 and never seen what you are looking for.

Charlie Stephens

 

Thank you, Charlie

 

Got this one at O’Rielly’s years ago

 

This may be what you are looking for.
https://www.nurex.com/pop-out-look-alike-ignition-switch-with-accessory-terminal
https://www.nurex.com/not-all-ignition-switches-are-the-same

 

Denis,

Thank you. I think Cole Herse (sp?) may have one that will fit. I didn't think to go to a parts store to look.

Patterg2003, I saw those this AM. I'm going to call because I want one that has start and then returns to ignition position.

 

Does yours have crank in the key or you still use the floor to crank ?

 

I use an old school floor button…

 

I use a fairly stock looking "A" dash in my 28A hotrod..
To get the room I needed,for a number of things,I gutted the inside of gas tank.
Also gutted out the back behind center "A"dash.
So room for a universal key switch

 

I'm guessing it's a part # 8675-309 by your picture......

 

Look up one for marine use.

Don't know if these are shallow enough.
Cole Hersee 4 position with key:
Acc 10a
Ign 10a
Start 5a
956-4100 4 blade terminals 1"- 24 bushing
956-4104 4 screw terminal 1"-24 bushing
956-4154 5 screw terminal 3/4"-24 bushing with ground terminal
956-4304 4 screw terminal 3/4"-24 bushing
956-4311 4 blade terminal 3/4"-24 bushing
956-4704 4 screw terminal 7/8"-24 bushing

HD
Acc 20a
Ign 20a
Start 10a
956-4138 4 blade terminal 1"-24 bushing

 

I'm going with a keyed on/off switch with a start button either on the dash or on the dash/vent panel.

Here's my friends '30:

 

Ahhh, I like the push button idea. Thanks!