Yeah, I’ll definitely grab some interior shots when I’m around. It’s old chill tuck and roll. Bias ply tires will be killer.
Nice li'l A-V8! The zerk fitting in the steering box fill plug was probably installed to use grease, yes. Reason? The old 90wt. gear oil will run out past the sector shaft seal if a header is too close! (ask me how I know) All flathead Ford/Merc V8s have 7/16" std. bolts on front exhaust ports, the others are 3/8" std. As mentioned above, the reason was because the earlier exhaust head pipes mounted on to the front 2 bolts, sandwiching the exhaust manifold on the front flanges. Good info above on the stainless bolt specs!