Hot Rods GENERATOR NATION post your generator pics

Dreddy Bear

 

On Delco generators a ball bearing rear end plate was common on IH and John Deere tractors. these will fit on automotive generators. Sometimes a sleeve will be needed between the od of the armature shaft & the id of the ball bearing. easy to make on a lathe speedshifter Greg White
er: 22276"] View attachment 5245336

 

Mine came off a 57 Chevy pickup, with a 265, pulleys and all. I rebuilt mine , now the front bearing is sealed, but I still get to oil the aft bearing! The only thing I haven’t been able to find are the tiny drive screws for the data plate. I plan on firing it up soon, hope it works! I have had quite a few comments on the size of my generator drive pulley.

 

How about a Chrome 91A with a small front pulley

 

Canton Texas

 

On the General Mischief Coupe . I still need to rebuild and detail the generator

 

TEXAS PLAYBOY, built by Bass

 

...Wow...what an awesome Hotrod...I had to look for that one it was hiding in the chrome...Beauty...

 

2022 Lone Star Roundup. GENERATOR NATION

 

One works, one cut down for fan hub

 

@zibo Chief

 

1961 Corvette...

 

Got a 70’s Sears…can’t give it away.

 

‘33 5W

 

Also my wifey in pic.

 

Seen at the 2023 Lone Star Roundup.

 

It's an alternative generator...