Projects need help to fabricate headers

im building a 32 roadster high boy with a 390 cad engine and need someone in the los angeles area to help build the headers. i have a tig welder

 

Then get the tubing and flanges build your own..

 

You should look up @Kiwi Kev .

 

or try these

Cadillac 390 429 V8 Plain Steel Street Rod Exhaust Headers CAD391-P Sanderson | eBay

 

Cadillac 365, 390, 429 Exhaust Header Flange, hot rat rod, custom exhaust | eBay

 

Here on the H.A.M.B. from Sutton Speed, post - link - https://www.jalopyjournal.com/forum...90-engine-build-for-my-34-ford-coupe.1153370/

Some nice fitting headers.

 

X2

Buy a heap of mandrel bent U-bends and a length of tube and there are companies in the US that laser cut the flanges that bolt on the heads for all sorts of engines, even a 390 Caddy. This is what my son and I did for my 401 Nailhead- I wanted to buy a set of Sanderson headers but he said they were too street-roddy LOL With a coat of HPC satin black the finished items look OK.
Then we did the rest of the system, joint flanges, mufflers and pipes out the back. As someone on here says " I may not be the best welder but I'm a damn good grinder"

 

Should be a lotta motorcycle chopper guys around LA without much going on anymore.

 

Belond headers! Hit up Jesse

 

I'm going to assume that you already have the flanges available at Cadillac 365-429 Exhaust Flange - Hells Gate Hot Rods and the bends and other tubing and need someone who can tig weld and fabricate to help on it.