Hot Rods Steering gear box swap

1930 Chevy truck- I want to replace the original steering box with a power steering gear box- wanting to keep it mounted on the inside/going through the frame to the outside so as to not loose the original look. Suggestions (as well what maybe to avoid)?

Thanks.

 

Both Ecklers, and Classic Chevy sell a kit for the Toyota box to fit 55-59 Chevy trucks.It has a adapter plate that allows mounting through the frame.Not cheap,but worth a look to see if it looks like you could do the same.

 

Early 80s 2 wheel drive pick up has a power steering box that fits nicely .
Tough to see the box but great fit on my 34 chev truck

 

@wood remover, I would really like to see a better picture of your set up.

 

Thanks irishsteve and wood remover. Here are the pics of what I've got.

 

Here are some pictures ,appears the box is an 83 has to be 2 wheel drive pick up .If you can find the pump with it ,they are small with a remote fill great set up !!!!

 

The box is bolted to the frame from the underside,the last 2 pictures you can see the bolt in the boxed frame .

 

Hey ice tea check your mail.

 

Thanks much!

 

We did one of those Toyota steering box kits on a 1950 F series truck.... Works very well....

LynnW