Art & Inspiration Who makes this lamp lens for a banjo rearend

Hi all,
Working on some stuff in the garage and have some failed drivetrain parts and wanted to make a standing lamp with an old torque tube and banjo center section and have seen theses “V8” lenses and others that were made for the Ford banjo. Who makes them???

Thanks,
Cliff Ramsdell

 

there was just a thread on the barn lately about this...I'll see if I can find it

 

Looks like they're not available right now. https://www.fordbarn.com/forum/showthread.php?t=298312
What are the dimensions? Maybe a gas pump lens could work?

 

I would be interested in some if they were available again.

 

quite a bit smaller than a gas pump globe lens. Have to make it yourself I guess! Just a ford script laying on a piece of glass, then sand blasted would do it

 

The banjo is 10” diameter and the pump globes range from 12” to 14”. I have been searching for the last month or so knowing that I had seen them somewhere and actually found the pictured on at a swap meet this weekend but wanted to know who was making them.

Thanks @rusty valley and @5window for the help.

Cliff Ramsdell