Looking for suggestions on AC /Alternator brackets that work on the 49' 53 ' flathead. With a 12V system At this time I have 2x2's with the narrow belt W/Ps. thanks
My ac is where the genny was, and you can see my bracket here, though I can't tell you where to buy one....
BJR, Thanks for your input. Running AC will take away from a source that is already low? But living in an area where AC is needed six months ayear is questionable.
I can't figure out why you guys make such a big deal out of what few horsepower it takes to run a small Sanden Air compressor. If he needs what little extra power the AC takes he can always turn the AC off. That shoebox weights about 500 lbs more than my 130 hp Prism GSI did and while you knew the ac compressor had kicked in it didn't drag that little banger down much. These new compressors don't take near the power that those Delco A-6 units did. With one of those he might have an issue.
Thanks for all the input. I think I was hoping that one of us can recommend a manufacture making the Alt/ Ac brackets.