here is an old thread about it. pretty simple car to lower. 3 inch blocks in back and 1.5 - 2 rounds off the front springs and done.... https://www.jalopyjournal.com/forum/threads/lowering-a-1953-chevy-210-4door.733619/#post-8149766
Fatman ... makes uprights for the front ... Eaton can make you rear springs with flipped eyes or with less arc or can also make you shorter coils for the front https://www.fatmanfab.com/product/dropped-uprights-and-dropped-spindles https://www.eatondetroitspring.com/
@verde742 I would suggest you investigate ‘dropped spindle supports’ as an alternative to cutting coils. Actually they may be, or should be, called ‘raised spindle supports’. In any case, that method lowers the front end but retains full suspension travel…..preventing/reducing ‘bottoming out’ the front A arms. EDIT: derbydad276 has a more complete reply and types faster… Ray
The Jalopy Journal
