Hot Rods 32 Ford 4-bar

Does anyone have a photos of 32 with 4 bar set up? I have a vintage Pete and jakes frame with that set up, just looking to see how it looks on a complete car.
Thanks

 

Pete and Jakes build hot rods will they will send you pictures.Not enough info 32 what?

 

Looking to see them on a built 32 ford 5w, can't find many photos with 4-bar

 

Is it a 32 Chevy,Ford Studebaker,Dodge,is it a Highboy,full fendered?

 

Here is mine; I hope this helps.
(And for the record, it drives and steers like a dream)

 

^^^^ pic of the truck above does not look to be a 1932 Ford 4 Bar , its looks Model A set up , a 32 "top bar "
(about 2 inch up from bottom of frame rail)
goes threw frame ,& bottom bar below frame , But model A set up will work.

 

Well, when I ordered that 4 bar setup in 1985, the part number was for a 1932 Ford. But if you say it’s a model A I’ll take your word for it.

 

Stllrng , Yours does not appear really Model A either (by looks of the photo)
I have seen A's four bar & the top bar is 1 1/2 - 3 inch below bottom of frame rail , A 's 4 bar on 32 frame can drag on speed bumps ( brackets are longer )
Maybe first production design 4 bar going from using HairPins ?

 

This is definitely a Pete and Jakes set up on a 32

 

I didn’t know there were differences between the two.
In fact when the OP asked for 4 bar pics I was about to look for rear end mounting photos !
Post 3 suggests this.
I still don’t know which end of the car he is trying to fix to his chassis......

 

I have a 32 ford 5W looking for front 4-bar set up. Thanks