Technical Fender Skirts ID Chevy?

Greetings Hambers. I need some help in doing ID on these fender skirts. 36" long tip to tip in a straight line measured from the back side. 8 1/2" tall in middle. Anyone recognize these? Thanks

 

'62 Chevy might be a possibility

 

That does look close but hard to tell. The little drop piece on the front bottom looks different and so does the front curve. Anyone else?

 

I feel sure those are '58 skirts.

 

This is a 1958 Chevy skirt and its not even close....

 

bump

 

1963 Impala skirts

 

'61 Buick full-size (should also fit '62). These are from a '61 Invicta

Here is an eBay listing for one with skirts also
https://vmp.ebay.com/ebay/viewAllPhotos.aspx?smid=32505929

 

If they are Foxcraft skirts you can wire brush the hell out of the inside bottom lip and there will be a coded year and make stamped to id what they fit.

 

Thanks for trying but looked at 63 chevy prior and still not it.

 

Tried that already but corrosion will not let that happen.

 

I think you may be on it here boss. If you still have these can you give me a tip to tip measurement from the back in a straight line and a height in the middle. Thanks!

 

I got the pictures off the internet. You might try contacting the sellers of the Buick in the eBay link

 

These are from a 64 ford . They look real close as well. But hard to be sure

 

Those are definetly Buick Skirts made by Foxcraft.
Will not fit any Chevys or any other cars.
One of the skirts is stamped into the metal on the bottom edge and the other from the inside
Number will be like BWS-61

 

yeas sir you are correct 1961 Buick. I finally found the stamp under the crap.

 

I know its been a while but do you still have them? I have a couple of 61 Buicks in Cincinnati