Register now to get rid of these ads!

Projects New Project, ‘60 El Camino

Discussion in 'The Hokey Ass Message Board' started by Al T, Nov 4, 2020.

  1. loudbang and Al T like this.
  2. Would this be the bracket for a W block?

    A51C3D44-A730-426D-A4A2-F86396000FFE.png
     
    alfin32 and loudbang like this.
  3. Kinda like my 1959 that came like it was at a paint shop. Just bought a 1960 mor dor parts car that will help a bunch.
     
    loudbang likes this.
  4. While searching for a seat some info would be helpful.
    Are ‘59 and ‘60 seats the same? I’m assuming a 2 door would have the same seat as an El Camino?

    Thanks in Advance.
     
    loudbang likes this.
  5. saltflats
    Joined: Aug 14, 2007
    Posts: 12,602

    saltflats
    Member
    from Missouri

    It's a little hard to tell from that picture but it does look correct.
     
    Al T and loudbang like this.

  6. Hopefully someone will chime in with a definitive answer, but as far as I recall my '60 and former '59 had the same seat, plus the seat can be used from a 2 door (split back). It used a car (or wagon) pan, hence the well under the bed grate (that usually rusts out).
     
    loudbang likes this.
  7. Thanks.
    The well in the box is really solid. I’ll get some better photos up once I get the car Saturday morning.

    Allan
     
    loudbang likes this.
  8. We used Pick-A-Part power split bench seat from a 90s Cadillac.

    IMG_5394.JPG P1010546.JPG
     
    Rolleiflex, blowby, loudbang and 3 others like this.
  9. Nice!!
    I’ve got a similar Power Seat in my ‘37 up North that I’m planning on replacing. Unfortunately it’s 1500 miles away and I probably wouldn’t be able to check them as luggage. lol
    64A73E1C-67FC-4DCC-A231-36229AEF60B7.png
     
    loudbang and Stogy like this.
  10. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    The sixes just had an emblem of some sort, (don't recall what it was like, longer than it was tall), the 283's had a V and the emblem in the V, and the 348 had the crossed flags within the V (as best as I can remember).
     
    loudbang likes this.
  11. Nice Score, and great that it is rust free. I have a really nice 60 Merc grill that would look great in there, shoot me a PM if interested.
    Sometimes I miss my 59
    IMG_0216.JPG
     
  12. Got lucky and found this locally on Craigslist yesterday. The seller was nice enough to deliver it to me today.

    FB72518A-4FE5-40F7-A907-209DA0A091A5.jpeg 172803F1-BB27-484B-96B7-E3D2373B3F7C.jpeg
     
  13. 60 Merc grilles looks great on 59 & 60 's Chev's
     
  14. They also look good in a 61 Oldsmobile! Moriarity recommended one for my ‘61 Dynamic 88 up north.
    CDB967D7-CF48-4648-BE2A-CCCA5DF9FE92.jpeg 3DB0D3BB-D199-446E-B043-F59F09180C89.jpeg
     
  15. Time to start having some fun.
    A3F9C50B-5060-45E6-B46D-D400DABCE84F.jpeg 9CFC5ED0-EA6E-4CB9-99E5-BD892DFEF5AD.jpeg 6E4C1AF0-27EF-4BA6-8658-9B0E3ECAFF61.jpeg 372DA162-7C2E-4589-B644-BE89DB22008E.jpeg
     
  16. Sorted out the parts in the El Camino today.
    Surprisingly all the trim for the upper fins were with the car. Just missing one “airplane” and the lower side trim.... which may be fun to find.
    Found the tail gate handle and latches also. The inner mechanism and rods were still installed in the tailgate.
    Also pulled out the front bumper (when I bought the car I was told it was the rear bumper) and found it still had its Black California plate on it which was kind of cool. Wish the back bumper hadn’t gone missing.
    Taking a closer look at it today, I would say it is not a frame off restoration, it’s just a really solid California car.

    8CF502B8-46B9-41AC-BC94-34E8CEC15D08.jpeg DD357085-267F-4317-BA54-B412CA4DBEC5.jpeg 7B864D42-C08F-4CA3-AF21-4553AB10D495.jpeg D03173EC-968F-43D9-A6A7-C8EC68957D19.jpeg
     
    Last edited: Nov 10, 2020
  17. Can anyone tell me where these parts go?

    08AD635B-7DBD-4809-AA37-0180DC6531C3.jpeg
     
    loudbang likes this.
  18. ...... and does anyone recognize any of this extra trim that was in the car?

    D3153712-B924-4DDA-B1A0-495A46B01795.jpeg
     
    loudbang likes this.
  19. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    The first two might go under the sill plates. Can't tell how long they are.
     
    427 sleeper, loudbang and Al T like this.
  20. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    The third from top piece of trim looks like 58 Chevy front fender.
     
    loudbang likes this.
  21. Could be! They’re about 3-1/2’ long. You can see it below the marker valence in this photo for size. I’ll check that tomorrow.
    96AAD5C5-F2C4-42E8-B71A-E5E258EFBBFE.jpeg
     
    loudbang likes this.
  22. I’ve got a ‘58 Impala. That’s not a ‘58 moulding. Thanks for the suggestion though.
     
    loudbang likes this.
  23. Second one down is a '59 fender, hard to tell if the top one is the one under the back window, across the pinch weld for the bed.

    Third down looks to be '57 Pontiac, same with the last 2.
     
    Last edited: Nov 10, 2020
    loudbang likes this.
  24. Red one maybe around tailgate hinge????.
     
    loudbang likes this.
  25. What about the rear inside panels for the bed, the sides, over the wheel wells and the grate. I see both rear lower valance panel, 1 front valance and interior trim. The bed top trim is in good shape.
     
    loudbang likes this.
  26. Thanks.

    I’ll check that tomorrow.

    I’m missing the rear inner panels but may have a line on one side of the panels. What does the grate look like?
    It looks like the car came with all the garnish moldings.
    A72FF67E-3103-479A-B6F6-8CDF31DE60C0.jpeg 082E53BB-060C-4601-8C6A-700A6B1451C3.jpeg
     
    loudbang likes this.
  27. Mine is apart and at my mom's house :).
    From google.
    [​IMG]
    [​IMG]
     
  28. You have the A pillar moldings and lower moldings in the first pics. It also has a small piece that covers the seam where the two rear pieces come together (under the interior light).
    [​IMG]
     
    loudbang likes this.
  29. The only thing I can't see in your pics are if the defrost diverter trim is there.

    From eBay:
    s-l1600.jpg
     
    loudbang likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.