Hello all; if I had a 4 bolt main 350 with flat top pistons, and 64cc camelhump heads, would an Offenhauser intake with 4 Holley 94's work ok or would I need some special cam? or maybe a small journal 327 with flat top pistons.
I can't help you with those questions but ask the other 347, I might have an answer for one of those. lol
I would say call a cam manufacturer with all your specs about the engine and the car- weight, rear end ratio, transmission etc. With just the given info no one can give you anything but a guess.
350 is off topic I guess, so I asked also about 327. Thinking SBC as mentioned with Muncie 4 speed and RPU and A frame. Just in planning stages right now.