I have an old custom dual quad finned oval air cleaner. I have a brand new filter but it's very short. I have two old well worn filters that I believe are Ford 4 x 2 or 3 x 2 that are taller. Can anyone give me part numbers for the correct replacement, even if it's old and I have to hunt for NOS. I really want the taller of the two which is approximately 2 3/8" tall. Thanks Its about 20 3/4" long by 9 1/2" wide
Napa has a resource on line to help you figure out what you have there based on measurements. Not NOS but could help point you in the right direction.
S&B oval AF7 (Tall). I found these through the Tony D. Branda website. http://store.cobranda.com/sbovairfielt.html
Just an FYI, Wix and Baldwin filters have dimensions for air filters listed in their catalogs. I have copies of both, and I can only assume that this info is on their websites. Sent from my iPhone using The H.A.M.B. mobile app
I would still like to find a Autolite, Motorcraft or a Fram part number. Balwin I have and it's the short one. Wix, I don't find one.
Don't remember where the photo came from but this is the type I'm looking for. I'll check into the S&B but I don't want one that is oiled cotton like a K&N
They have been out of production too long to find any oem ones unless someone has dug some old stock out of a Ford dealer's attic. I'd say check with this outfit https://www.cjponyparts.com/1964-1973-mustang-parts/c/10000000/?p=1&product_type_cj=9 or another Ford Performance /Mustang parts and trinket peddler. Here: This is probably as close as you are going to get on what you are asking for. Scroll down. http://www.cobranda.com/aircleaners.html
https://www.autopartsandstuff.com/motorcraft-fa48-elementassembly-airfilter.aspx Motorcraft # FA48 but its 1.8" tall.
I think to get the extra height, you will have to go to S&B or K&N filter. K&N has a 3" tall filter KNN-E-1963
The original elements are super rare, so it seems. Here is one one fleabay and it has the word "TOP" in white paint like the one the OP posted.https://www.ebay.com/itm/NOS-427-GA...-FILTER-RARE-C3AZ-9601-E-FOMOCO-/303296369710
Yup and that's the shorter of the two I have. Can't imagine what a taller NOS would cost. So I ordered the motorcraft FA48 one that's 1.8" tall for the time being
I'll look some more but "top" was the only print. I'll see if there is anything molded in anywhere tomorrow when I'm back in the shop.
I had a 69 Mustang that had a 427 R code engine transplant with the 2-4 barrel carburetors. I did a search and that filter has the same dimensions. I found this tall one on the Tony D. Branda site that was mentioned by Mr48chev. http://www.cobranda.com/sbovairfielt.html