Technical 283 SBC to 39 trans

Hey HAMB folks.
Anybody out there have the right part numbers to set up a 283 SBC to FORD 39 trans.? I already have the adapter.

Flywheel , Clutch and pressure plate.

I know this is all pretty standard hot rod info so I appreciate your help identifying. Thank s in advance Andy

 

Use the Chevy flywheel, get a pressure plate for a 49 to early 51 Merc, and use a clutch disc for a 10" 1 3/8th 10 spline Ford. A 59A replacement will work. With this set up, you can use the stock 39 trans throw out bearing. I don't have the part numbers but a GOOD local parts guy can do it for you. If that isn't possible, go to Van Pelt sales. They should know.

 

Will this help
https://static.speedwaymotors.com/pdf/720-0392.pdf

 

This is the style of pressure plate you need https://www.oreillyauto.com/detail/...25/1965/chevrolet/biscayne?q=clutch+set&pos=6

 

Don't forget to get the long spigot bush it has to sit proud of the crank about 3/4 of a inch or so

 

one can piece it cheaply or get the kit and pay up..
http://www.wilcap.com/wilcapstore.h...p/69745589/category=14420222&forcescroll=true