Hot Rods I finally got a Roto-Faze distributor!! So let’s do a show your ignition parts thread!!!

That Roto Faze is cool!

 

I kinda wondered. That's too bad. What else do you have with a SBC that you could use it on?

 

The only time I saw a rotofaze under a hood, it was something like a 55 chevy. The only place I saw them was the drag strip. My area had many dual point units but I remember only 1 dual coil unit.

 

You can ship it to me ,I don't have clearance problems in my T !!

 

N.O.S. Mallory 6 cylinder caps Brown and black
N.O.S. MAG-Spark Coil
N.O.S. Dual point conversions BlueFlame 6
Several BlumeFlame Mallorys

4 Sun 6 Cylinder Sending units


Rebuilt Dual point conversions and Best coil for BlueFlame


Spool of Packard 440 wire


Raja Spark plug ends 440 wire and end are left over from my dads oval track racing in the early 70s

 

Down to two Olds magnetos, one with tach drive and one without

 

The lowly Mallory..

 

Moriarity, If you weren't going to run the tach drive I believe you could modify the dizzy and gain that 1" or more you need. I have modified a couple Spalding/Grant's to fit my needs.....................
What's that Aluminum spacer between the tach drive housing and dizzy caps, just a spacer or is there a reason for it?
Here's a Ford 351 Cleveland I lowered 3 1/2" .

 

So run a '58 Vette generator! Kinda snowballs doesn't it!

 

in the case it goes ! Thats a neat dizzy !

 

This belongs to a friend, Old school racer trick-WICO Model X magneto for a Chrysler flathead 6 mated to a BlueFlame Chev. 6 drive!

 

Cool! Looks a bit "tall"; sure it'll fit under the low Corvette hood? I am Butch/56sedandelivery.

 

Butch, You got caught not reading the hole thread!

 

You guys are hoarders.

 

Really?!?!?!? Your OTHER Man a Fre... LOL!

 

^^^^^^^^^^^And he even had the nerve to start this thread!^^^^^^^^^^^^^^
Remind you of anyone else? Starts with Funk*********** smileyface

 

Please enlighten me, what is the advantage of the Roto Faze distributor? There’s no doubt that it’s way cool, and neat looking.


Sent from my iPhone using The H.A.M.B. mobile app

 

sawzall...

 

Hood or distributor shaft?!

 

yes

 

Joe Hunt 348/409

 

Mr Moriarity,
Could you possibly show us a pic of the flamethrower with the top cap off, just to see how the Vac canister hooks up inside the unit?
Much appreciated if you could.
Chris

 

Thanks Moriarity,
Just trying to work out what the difference is between the Vac and non vac units(regarding the plates and mechanisms)
I am going to try and modify one of mine.
Cheers for the reply.