Hot Rods I finally got a Roto-Faze distributor!! So let’s do a show your ignition parts thread!!!

That would look real good in the Corvette. My question though is where do the replacement parts come from? Caps, rotors, points etc....

 

Congratulations, I have been wanting one of those for a long time.

 

Thats a awesome find and impossible to find one or parts. If you do get a list of parts could you please share them thanks

 

Quote from an old post:

"The rotofaze uses two coils and separate points they are 4 banger type points
when I had the kookie car I had to learn alot on how to use and set the rotofaze.I also learned that when one set of points go`s out you only have one side of you motor working,so your 8 cyclender turns into a 4 cycelender.
Also finding points was hard I found out ol willies jeep cap rotor and points worked .but that was then I don`t know if you can find that stuff as easy anymore lol.Hope that helps if you get one I`ll try to help....................

Endsville Franco................."

 

Rare Miller dual distributor .

 

Not real rare but I bought this NOS Delco single point distributor for my 327/350 h.p. in the 80's at the Eugene Swap Meet, came from GM with the cap and rotor installed, the application on the box said it was for 64-67.


Got this GM plug wire set about the same time, ordered from the local Chevy dealer.

 

Wow Jackpot!!!!
Congrats I know everyone here is hoping you get it working and in the vette.

 

What’s the number on the distributor, I can ID the application for you if you’d like.

 

#1111500
It is a generic service replacement distributor.
I paid $75.00 for it in the mid 80's, if it was application specific to a 327/350 h.p. it would have been big $$$ even back then.

 

@Moriarity, is there any cool old shit that you DON'T have??? It never ceases to amaze me what you have in your collection! I'm a little jealous, but on the other hand, you give Awesome idea's for what I need in my collection!

 

And, If you can't get the Mallory points, Echlin CS754 points from NAPA work as well.

 

Do the W&H Ducoils actually use 2 coils when installed?
Your collection is impressive.

 

Moriarty, the only Roto Faze I won is my 3 phase converter for my shop. It puts out a lot of spark too.

 

Grant for SBF.

 

Well, my brain just melted.

 

A SBC Grant I modified to run in my Cad motor and an early SBC Spalding

 

I'll play , all Cadillac..... Hunt Wannabe Electronic, Hunt Magneto, Spalding, Mallory MagSpark


NOS DuCoil

 

Nothing flash but an early Mallory for a Studebaker, that with a very minor change needed to will fit an early 331 Cad motor View attachment 4829750

 

Most impressive collection you have there Mike!!

 

He just wants it for his Corvette. Better measure twice.