Technical Picture request: ‘33-‘34 ford radiator splash apron and triangle pan installed

I’ve found the diagram side view but that doesn’t show much detail. Trying figure out what bolts to what in relation to inner fenders, grill, etc.

Thanks in advance

Gnater


Sent from my iPad using H.A.M.B.

 

btt

 

Read this, not sure but I think your photo is in there.
http://www.the34fordroadster.com/

 

Thanks AngleDrive, I actually had his site bookmarked. Great info but no pics of what I need. I believe I have things correct now, or at least as my dad had them when he was putting it together. Got the splash apron and inner fenders bolted together and the grill in. The triangle pan may not work with the current front end it has.

I appreciate your help!


Sent from my iPad using H.A.M.B.

 

The triangle pan bolts to the fenders, there are recesses in the bottom of the grill for the bolt heads. There should be D-nuts inside the bottom of the grill and the bolts go in from the fenders up into those d-nuts in grill.

Sent from my SM-G973U using The H.A.M.B. mobile app

 

Hope this helps.

 

One of the hardest hod , grill , front sheet metal to align that I have ever touched

 

On my '33 after the inner panels I installed the fenders then the grille.The inner pan went in last.There are 2 caged nuts on the grille that the pan attaches to.

 

That’s perfect, thanks. Mystery solved!!


Sent from my iPad using H.A.M.B.

 

The pan is bolted to the fenders then the gille has two bolts that go thru the pan to hold the grille in...Like was said there are D-Nuts in the grille for these two bolts....