Technical Early Ford,Chevy,Packard. Junk or Not?

Hello, I went to a place early this morning for a couple hours I've never been. I just thought I would share a few photos with you. Looks like I'm quite a bit too late for all this. Just wondering if you guys thought this was all junk or there was some stuff worth saving here. Thank you, Ron

 

More photos

 

More photos

 

More photos

 

Money maker if bought right.

 

Sure its junk, but it could be valuable to someone. Remember, one man's junk is another man's treasure.

 

Yeah I can get it real cheap. Could just pile in there with the rest of my other stuff in the building

 

Nothing there is the holy grail of parts.
But if you can get it cheap
The steering n suspension stuff the manifold would be useful to someone.

the rims/wheels/if not rusted out will sell also
Not huge money makers but there’s money there or at least bartering material

 

Thanks for the replies. Yeah there's a lot more to look at and go through. Maybe I'll get to go back here in a few days and see what else I can find. Still a ton of stuff to uncover.

 

Measure the '34-'36 Chev wheel - it looks like a 16'' K-H replacement, which is a hard wheel to find.
The Plymouth/Dodge shift lever is worth keeping.

 

Okay I'll make sure those wire wheels next time I'm there. Theirs actually two of those wire wheels. Thanks

 

There is your money maker, do you know what it is? Bob

 

i see the bijoir oiler, but dont know what the steering box is, packard? i would be checking to see if the ford frame in the weeds is good. thats some money there

 

Bob,
I hope you're talkin about this because I did happen to buy this this morning.

 

I got it for $1

 

Mostly scrap, it could take years to resell, a few parts are good, if they are good inside and such.
Don't go over board on buying price

 

Lots more stuff to go through. Can't wait I had a blast.

 

Yeah I didn't buy much this morning. I just hate to see stuff get scrapped. Thanks, Ron

 

Another photo of the steering box

 

Late 30's or 40 Chevy beam axle or possibly early knee action, not 39 or later coil spring.

 

Looks like early 20's. Not sure what dash it went on though

 

I guess these are 33 34 Ford hinges. Looks like the number says 713570 - A

 

Here's a photo of a few more of the pieces from this morning.

 

This looks like it could be 1924 ish Packard.

 

.

 

Yeah I believe you're right about the 24 Packard

 

Definitely some keepers among the junk.

 

.

 

That's some pretty neat junk. It will take a lot of time to research what it is, post it, sell it and ship it. And as has been said, possibly only a portion will sell right away, leaving you with lots of "stuff" to deal with for some long while.

But good for you for saving it from scrap.

 

Yeah it will take awhile to figure out what all it is. Maybe I'll get to go back there in a Month or so. This piece has me puzzled. The 3 pieces were wired together. I didnt see any numbers. I'll have to look again and make sure.