Projects Canadians ? Mercury trucks Beaumont and Acadian

Okay Canadian hambers. What do you for restoration parts and trim specific to replacing or restoring parts for your Beaumont’s and Acadian cars and Mercury trucks ? Such as grills , emblems and trim?

 

Short answer, find better original pieces from parts vehicles.
What is it you're after?

 

Info as to wether there are any repops companies out there or SOL. I have a ‘48 F1 but would be interested in M47 exterior trim. Also Acadian and Beaumont grills 1960’s.

 

Ttt

 

I have yet to see any repop Merc items, however they were fairly common up here so I am sure you could locate some good originals(Try Terry @ https://www.rustinpieces.ca/ ). same goes for the Beaumont grille. Try the dudes over on the Canadian Poncho boards.
I work for a GM dealer and the couple times I have tried to source repop Acadian items found nothing at all, even up here it's hard to come by.

 

Same with Meteor and FARGO...

 

Thanks . My brother ran the Beaumont grill on his 1964 Chevelle and it looked a hundred times better than the stock one. A friend had a ‘69 Pontiac Beaumont.

 

In the Rodder's Journal #32 which is chock full of '32 Fords there is featured a Barry Lobeck built '32 hiboy with Monarch hubcaps. Always wondered how they found a set. Can't ask Barry.

 

They sell repops of ‘em now.