Register now to get rid of these ads!

Technical Grill Shell Identification

Discussion in 'The Hokey Ass Message Board' started by Boywelder, May 28, 2020.

  1. Boywelder
    Joined: May 12, 2020
    Posts: 65

    Boywelder
    Member
    from Waco Tx

    Hey guys, I bought this grill shell yesterday from an older gentleman and he did not know what it was off of and neither do I. I have spent several hours searching the internet with no luck on finding out what it came off of. Any help on figuring out what this grill is from would be much appreciated!

    It has a half round cutout on each side of the top for a 4 headlight car maybe??
    It has very old chrome on it and one the hood flange there are scraps of cloth weather stripping
    Here are some measurements
    Radiator opening is 21.5” wide, 27.5” tall
    Outside is 28” wide, 33” tall
     

    Attached Files:

  2. squirrel
    Joined: Sep 23, 2004
    Posts: 56,077

    squirrel
    Member

    Headlights never went that high on cars from that era (mid 20s-early 30s). Probably a neat looking car, whatever it was. Someone will know...
     
  3. midroad
    Joined: Mar 8, 2013
    Posts: 296

    midroad
    Member

    Pre WW2 English Vauxhall had fluted grill and hood like that.
     
    mgtstumpy, 34 GAZ and X38 like this.
  4. vauxhall 1.jpg vauxhall 2.jpg vauxhall 3.jpg
    Thats right. You can allways ID a early vintage Vauxhall ( even up to the mid 1950s ) by the top corners of the grille and how that form follows through along the sides if the hood with a big stainless trim. Must have been a designer there who had a thing with hood strips :D. So how would a vintage Vauxhall grille end up in CA. ?
     
    Last edited: May 29, 2020

  5. Deuce Lover
    Joined: Feb 15, 2009
    Posts: 1,054

    Deuce Lover
    Member

    Post the pics on the AACA.org Website .They might have the answer.
     
  6. Boywelder
    Joined: May 12, 2020
    Posts: 65

    Boywelder
    Member
    from Waco Tx


    Do you have any idea how much it is worth?
     
  7. arkiehotrods
    Joined: Mar 9, 2006
    Posts: 6,802

    arkiehotrods
    Member

    I just googled multiple years of Vauxhalls and none of them have the raised ridge that goes from the radiator cap down to the radiator. Instead, they all have a round Vauxhall emblem in that area. Not saying it's not a Vauxhall but I have not found one with the ridge and they all have the round emblem.
     
    Boywelder and squirrel like this.
  8. squirrel
    Joined: Sep 23, 2004
    Posts: 56,077

    squirrel
    Member

    yup, keep looking...
     
    milwscruffy likes this.
  9. SR100
    Joined: Nov 26, 2013
    Posts: 1,131

    SR100
    Member

    I'm having a tough time finding a clear pic, but it looks like a '26-8 Chrysler Imperial:
    [​IMG]
     
  10. Given the country its in I bet you nailed it.
     
  11. Boywelder
    Joined: May 12, 2020
    Posts: 65

    Boywelder
    Member
    from Waco Tx

    I think that is exactly it, thank you for the help guys!!
     
  12. arkiehotrods
    Joined: Mar 9, 2006
    Posts: 6,802

    arkiehotrods
    Member

    Good job @SR100 !!! Here's another photo of Chrysler, this one a '27 27 chrysler.jpg
     
    Boywelder likes this.
  13. Free beer for SR100 , Boywelder pays.:oops: He,s a newbie here.:D
     
    Boywelder and kidcampbell71 like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.