How to Build a Voltage Regulator for $3

Antiseize is a lot closer to heat sink paste, than JB weld is.

 

This thread is really what I needed. The component he chose as a VR makes good sense for the application. I am wondering if putting all the VRs that are used on one big heat sink would work just as good as using a small heat sink for each VR. That way I can run wires from all the VRs that are installed in one location on one heat sink. There is a nice big open area right under my gauge cluster to install the heat sink too.

 

Thanks allot for this thread. I made two for my 1950 pontiac.