Hot Rods 1934 Ford tailight position

I need some information
I,m working on a friends 34 Ford coupe
I need measurements for the stock Taillight brackets so I can mount stock taillights.
How far from the body?
How far up from the bottom of the fender?
Thanks

 

Do you have these? they bolt under the fender and will locate the stand for you.
they are in Bob Drakes catalog.

• 1932-48 CARS & 32-47 TRUCKS
• 1933-1934
• LIGHTS
• TAILLIGHTS & PARTS

Taillight Brace; fits 1933-34 Car



Item Number:
40-13463
Your Price:
$30.00 EA
In Stock
Qty:
ShareFacebookTwitterEmail

Reinforces taillight brackets to fenders. These braces are a must to keep fender and taillight stand rigid. Painted black. What’s hidden beneath your rear fenders is very important. These braces were on your Ford when it was new, and for a darn good reason. Especially for cars with rumble seats, these braces offer the necessary support and shielding to protect your fenders and wiring from damage. Replace your corroded, weakened original units with fresh new braces. Bolts to the frame and provides needed support to the fender and taillight while also keeping the taillight wiring shielded and in place. RH or LH.

 

Thanks but it has glass fenders and the fenderwells are heavily modified
I do have those brackets thou

 

I have sedan fenders. They should be the same. If you want measurements let me know

 

Yes,I do

 

Hopefully my picture makes sense

 

31aFORD Thanks for the help.
The measurement from the edge of the fender,is that inside or outside edge?
Thanks again

 

The measurement is from the inside edge of the fender. The bottom hole is measured from the bottom edge of the fender