Register now to get rid of these ads!

Projects Dream Deuce Build

Discussion in 'Traditional Hot Rods' started by jim1932, Jan 8, 2019.

  1. blackbeard40
    Joined: May 25, 2009
    Posts: 51

    blackbeard40
    Member
    from Maryland

    Hey Jim Nice 32. Bring that baby to the Jalopyrama Saturday, April 27, 2019 at Talbots County Community Center, in Easton Maryland.


    Sent from my iPad using The H.A.M.B. mobile app
     
    kidcampbell71, loudbang and OLSKOOL57 like this.
  2. Sorry Jim, I couldn't stand it, the car done this well needs the focus...…….
    32 5w banger 02a.jpg
     
    V8-m, kidcampbell71, alfin32 and 2 others like this.
  3. Dave Phantom
    Joined: Dec 24, 2017
    Posts: 10

    Dave Phantom

    Great Ride.
     
    loudbang and OLSKOOL57 like this.
  4. OLSKOOL57
    Joined: Feb 14, 2019
    Posts: 477

    OLSKOOL57
    Member

    I definitely agree!! Drive and enjoy !! I am envious but happy for you!!
     
    hotcoupe, lothiandon1940 and loudbang like this.
  5. OLSKOOL57
    Joined: Feb 14, 2019
    Posts: 477

    OLSKOOL57
    Member


    Buy a bunnnnch...........,!
     
    lothiandon1940 and loudbang like this.
  6. koolbeans
    Joined: Apr 12, 2015
    Posts: 633

    koolbeans
    Member

    Most spreader bars so far are way off junk. Don't get it....

    Sent from my XT1710-02 using The H.A.M.B. mobile app
     
    loudbang likes this.
  7. koolbeans
    Joined: Apr 12, 2015
    Posts: 633

    koolbeans
    Member

    loudbang likes this.
  8. koolbeans
    Joined: Apr 12, 2015
    Posts: 633

    koolbeans
    Member

    loudbang likes this.
  9. Still waiting on the rebuilt motor, but bolted up the bling to a spare block to check it out and to work on the carb linkage. Also a shot of it out and about.

    motor 1.jpeg motor 2.jpeg car 1.jpeg
     
  10. Yackobeen
    Joined: Sep 12, 2012
    Posts: 4

    Yackobeen
    Member

    Hey, Great looking build! for what its worth, the new parts being made for burns includes throttle levers and all sorts of linkage parts for these too. Get in touch with them they have more than what is on the site.
    https://burnsracingequipment.com/
     
    kidcampbell71 and loudbang like this.
  11. pumpman
    Joined: Dec 6, 2010
    Posts: 2,674

    pumpman
    Member

    Great car, you lucky dog!
     
    loudbang likes this.
  12. Took my mother -in-law for a ride....[​IMG]


    Sent from my iPhone using H.A.M.B.
     
  13. Stopped here too[​IMG]


    Sent from my iPhone using H.A.M.B.
     
  14. Fixing some of the ugly from prior owners. Put the battery under floor where it belongs. I took the floor mat out when I did it. I think I like the bare wood floor better....
    57973582016__452CFA33-0340-44F3-AEB5-4E9F84B36ECE.JPG 58311153083__E180EFDC-8227-435B-84A5-1C66AC4DAC83.JPG IMG_1670.jpg
     
  15. krylon32
    Joined: Jan 29, 2006
    Posts: 9,397

    krylon32
    ALLIANCE MEMBER
    from Nebraska
    1. Central Nebraska H.A.M.B.

    Really like your build. I'm not very knowledgeable about 4 cylinder cars. Is your motor with all that bling going to fit under the hood? It looks kinda tall.
     
  16. Lots of room[​IMG]


    Sent from my iPhone using H.A.M.B.
     
    alfin32, loudbang and kidcampbell71 like this.
  17. deucendude
    Joined: Oct 31, 2008
    Posts: 669

    deucendude
    Member
    from norcal

    Very nice 32! I would be proud to own it!
     
    kidcampbell71 and loudbang like this.
  18. Had it up in Massachusetts this past week. IMG_1726.jpg
     
  19. IMG_1831.jpg IMG_1832.jpg IMG_1833.jpg Added a repop luggage rack spreader bar and decided to try the bumperless look. It was pouring outside so no decent photo.
     
    35cab, oliver westlund, clem and 5 others like this.
  20. 8B2C066D-F4E7-4031-ADAD-B3584C1C1074.jpeg E25A2B0E-3029-45B5-8F1D-323BC4ACBAF4.jpeg Definitely liking the look.
     
    alfin32, Just Gary, -Brent- and 6 others like this.
  21. sorry been negligent on this post. Mainly a lot of small stuff. Replace Generator(doesn't charge and wrong one), halfway through a new wiring harness. got delayed because I decided to switch out head lights(more on that later). Need to blow out the vent tube in the gas tank so the gauge will work. Also looking at using my dual temp/gas gauge. need to get the rumble seat set up. have to replace a bent upright that was drilled like 6 times. Need to pull the front axle and send it to Kohler Brothers for a mild drop. Then the biggest chore. Getting the new banger motor and installing it. Fortunately I have a couple guys who know what they are doing to help me with that.

    Goal is to get it to Jalopyrama in Easton. wish me luck.
     
  22. Bought a set of original Arrow headlights for the car. Stripped them and now they are luxuriating in the 911 rust dissolve while I drink bourbon and wait......[​IMG]


    Sent from my iPhone using H.A.M.B.
     
    V8-m, nunattax, kidcampbell71 and 3 others like this.
  23. I love the way the 911 works... even takes paint off....

    IMG_2831.jpg IMG_2832.jpg
     
    V8-m, nunattax, kidcampbell71 and 4 others like this.
  24. Still working on the original head lights, but in the mean time, bought So-Cal reproductions.

    dropped.jpg arrow 3.JPG
     
    alfin32, kidcampbell71 and Just Gary like this.
  25. Also picked out a color for the new motor. 1930's Chevy Grey. Thought it would be a good twist on dropping a chevy in it.

    chevy grey.jpg
     
    alfin32, kidcampbell71 and Just Gary like this.
  26. Man, that is so cool. I wouldn't have chopped it either.
     
    nunattax likes this.
  27. Sorry it has been so slow. Looks like the new motor will be done this month....maybe... Still leaning towards the Simmons power head over the Brierley. I am positive the Brierley is a better head, but not the look for this car. It next motor will be a "Modern banger with FSI, Brierley and maybe a weber carb, in a roadster of some sort. (a fella can dream).... always liked the Model T turtle deck cars. Have my generator out for rebuild, but in the meantime installed a power Gen. Very happy with it.

    What have I done since posting... moved the battery to the stock location, rewired the car. STILL having issues with the fuel gauge. Added a vented cap but it still blows all the fluid out the top of the gauge the first time I fill it up. The restorer crowd says it is a clogged vent in the gas pickup. Need to rune the gas out of it to pull the tank. Oh, gonna put the Bumpers back on too. Last remaining item is a dropped front axle. Been thinking of picking one up so that I can get it dropped then put it in at the same time I pull the other one. I am VERY adverse to a car on blocks. I like to drive it. Adding the dropped axle when I put the new motor in seems like the ticket. Now if I can get an OD transmission....LOL
     
    loudbang and greaser like this.
  28. Haven't posted in quite a while, been over on the garage journal. Inherited a lot with a garage and no house in Massachusetts. Work is on hold on car till I redo the garage.

    IMG_0525.jpg IMG_0522.jpg IMG_0521.jpg IMG_0520.jpg IMG_0519 (1).jpg
     
  29. started in June, getting close......

    IMG_1210.jpg IMG_1207 (1).jpg 65093765524__4D45AB49-6AF9-4887-A0BC-4429FCF153E1.fullsizerender.jpg 65118437482__0502118D-CCD0-4981-A1A5-BB149ED76302.fullsizerender.jpg IMG_1236.jpg IMG_1564 (1).jpg IMG_1581.jpg IMG_1608.jpg
     
    treb11, wheeldog57, rod1 and 15 others like this.
  30. Oh, and some Massachusetts photos of the car......

    IMG_1562.jpg IMG_1561.jpg
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.