Register now to get rid of these ads!

Projects Kicking the T bucket build

Discussion in 'The Hokey Ass Message Board' started by raven, Oct 8, 2019.

  1. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    Does anyone have an extra T frame front cross member they would part with. I’m trying to use as much original T parts on the frame as I can. No use building a cross member when Ford already made them.
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1 and loudbang like this.
  2. DDDenny
    Joined: Feb 6, 2015
    Posts: 19,144

    DDDenny
    Member
    from oregon

    Riiight!
     
  3. OFT
    Joined: Jun 1, 2005
    Posts: 574

    OFT
    Member

     
    Thor1 and loudbang like this.
  4. OFT
    Joined: Jun 1, 2005
    Posts: 574

    OFT
    Member

    hotrods and dogs 001.jpg
    Hard to see the front plate, best picture I have.
     
    Thor1, gonzo, pitman and 1 other person like this.
  5. loudbang
    Joined: Jul 23, 2013
    Posts: 40,276

    loudbang
    Member


    A little bigger shot :)

    1.jpg
     
    Thor1, charleyw and OFT like this.
  6. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    With the spring on top of the mount did you realize any difference in handling?
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1 and loudbang like this.
  7. OFT
    Joined: Jun 1, 2005
    Posts: 574

    OFT
    Member

    Not really as it was set up that way when I built it for lowness. It had 4.10 gears with a 5 speed that was non overdrive. Handled like it was on rails:). Blast to drive with the 153" Chevy II motor.
    It handled lots better than "fad T" I had in 80's (sold in the late 80's).
     
    Last edited: Oct 13, 2019
    Thor1 and loudbang like this.
  8. OFT
    Joined: Jun 1, 2005
    Posts: 574

    OFT
    Member

    Thor1 and loudbang like this.
  9. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    Steel came in and I was able to complete the perimeter of the frame. I’ll need to make some adjustments before I move to the next thing, but it’s closer to rolling now.
    r

    [​IMG]


    Sent from my iPhone using H.A.M.B.
     
    Thor1, Stock Racer, AHotRod and 6 others like this.
  10. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    Just a note, never be afraid to redo something. I wasn’t happy with the frame and started to remeasure everything. Was a little out of square. Realized tha one frame rail was ahead of the other a little. Came up with a plan of action and started cutting specific spot welds to relieve the frame. On the last cut, the game did it’s best Jenga impersonation. I just had to laugh. I had rushed a bit of the first time. Took it almost all apart and started again. Got it back together and am much happier with it now.
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1, Blues4U, brEad and 13 others like this.
  11. Roothawg
    Joined: Mar 14, 2001
    Posts: 24,523

    Roothawg
    Member

    Go man Go! I have a similar pile of parts I may throw together.
     
    Thor1 and loudbang like this.
  12. You're not going to run those hairpins like that are you? Don't you know that it will turn your rear end into a sway bar? :rolleyes:

    Sorry I just could not resist. :D

    Movin right along looks good.
     
    Thor1, Tim and loudbang like this.
  13. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    :p
    Got the rear suspension tacked in.
    [​IMG]
    [​IMG]

    Now to start making upper mounts for the coil overs.

    [​IMG]
    [​IMG]

    Just need to cut the tubing and weld.
    Mounts from scratch.
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1, brEad, Stock Racer and 5 others like this.
  14. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    A little update, got the rear half of the frame sitting on its own.
    Coil overs mounted with the adapters I had to build to go from stud mount to eye mounts. Had to redesign a couple of times but moderately pleased with the outcome.
    The coil overs can be changed out to eye mounts at both ends of someone wanted to. I just used what I had.
    [​IMG][​IMG][​IMG]

    Test fit the body to discover what needs to change and found a couple of things that I will have to redo or rethink.
    First the ladder bars interfere with the turtle deck.
    [​IMG]
    [​IMG]



    Sent from my iPhone using H.A.M.B.
     
    Thor1, brEad, Stock Racer and 4 others like this.
  15. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    I think that I will bring in the rear mount another 1.5” on each side and move the front mounts out to be flush with the outside of the frame. I’ll have less angle to the ladder bars in relation to the outside of the frame but as light as the car will be, it shouldn’t pose a problem. It will be more like the rear ladder bars on my 27 roadster and it’s worked exceptionally well over the years.

    Another issue is that I can’t use the fuel cell I had for this.
    It fits where I wanted to mount it towards the front of the turtle deck but the center of the rear end is in the way of the sump on the rear of the fuel cell.
    So I’ll be using a cylindrical tank instead.
    [​IMG]

    With the body sitting on the frame, I can start designing how I’m going to mount it on the frame.
    I hate the actual fiberglassing so I am toying with the idea of building everything on the frame (floor, seats/mounts, dash hoop) and making the body just slip on over everything.
    There are a couple 60’s T buckets that were built like that although they were drag cars, but I’m thinking why not?
    There is one in particular I am referring to. It was a cover car with a chrome frame and the body was panel painted white with green metallic panels.
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1, tb33anda3rd, Tall t 26 and 7 others like this.
  16. F0B92F3A-EB71-4ED0-8B81-E91D01A55752.jpeg Grasshopper?
     
    scott27, Thor1, tb33anda3rd and 7 others like this.
  17. alchemy
    Joined: Sep 27, 2002
    Posts: 20,407

    alchemy
    Member

    As an homage to the Grasshopper, you could name yours after an insect too. How about paint it orange and call it the Lady Bug?
     
    Thor1 likes this.
  18. sodas38
    Joined: Sep 17, 2004
    Posts: 2,410

    sodas38
    Member

    Looking good Raven!
     
    Thor1 and loudbang like this.
  19. Roothawg
    Joined: Mar 14, 2001
    Posts: 24,523

    Roothawg
    Member

    Insect names on cars is gay...
     
    Thor1, Tman, iwanaflattie and 2 others like this.
  20. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    YES, that’s it!
    I love that car.
    r


    Sent from my iPhone using H.A.M.B.
     
  21. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    There will be nothing ‘lady-like’ about this car...
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1 and loudbang like this.
  22. alchemy
    Joined: Sep 27, 2002
    Posts: 20,407

    alchemy
    Member

    HAMB Drags Battle of the Insects!
     
    Thor1, Tman, Stogy and 1 other person like this.
  23. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    LOL

    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1 and loudbang like this.
  24. Grudge race between the "Fly" and the "Grasshopper"! Runnin for pinks at MoKan!
     
    Thor1, Roothawg and loudbang like this.
  25. Tim
    Joined: Mar 2, 2001
    Posts: 17,097

    Tim
    Member
    from KCMO

  26. upspirate
    Joined: Apr 15, 2012
    Posts: 2,299

    upspirate
    Member

    No pan hard bar or watts link?
     
  27. Tim
    Joined: Mar 2, 2001
    Posts: 17,097

    Tim
    Member
    from KCMO

    It’s literally tacked together dude give him a minute lmao
     
    gonzo and upspirate like this.
  28. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    It will have a panhard bar. I learned my lesson on my first roadster, tack everything first, then when you have caught all the gotchas, do a final weld. The body will be on and off several times during this build. That’s just the way it goes.
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1, gonzo, OFT and 2 others like this.
  29. raven
    Joined: Aug 19, 2002
    Posts: 4,698

    raven
    Member

    Tim, thanks for that video.
    I want to do a roll bar like that, it mounts to the side of the frame.
    r


    Sent from my iPhone using H.A.M.B.
     
    Thor1, brEad and Tim like this.
  30. lake_harley
    Joined: Jun 4, 2017
    Posts: 2,159

    lake_harley
    Member

    Interesting coilovers. The bottom looks like a homemade bracket to mount them, but the top (and they appear inverted) looks more like a regular coilover with the adjuster sleeve. Care to educate us?

    Lynn
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.