Projects 60s Model A Coupe on Deuce chassis 392 Hemi

Thanks.

Its a ubolt elimination style setup. Somewhat visible in this photo. Besides the visible tabs, there is a matching plate under the spring pack.

 

Thank you. I really like the clean look of your set up.

 

!?

Sent from my KFDOWI using The H.A.M.B. mobile app

 

Very nice work. Can’t wait to see the future progress!


Sent from my iPhone using H.A.M.B.

 

Thanks. Getting set to blast the body and send parts for chroming. So pix may slow for a bit.

 

Very nice work, like the front shock/headlight bar setup. Bob

 

Took a while to get the body blasted. No surprises. Solid body with a couple small patches. Since patch panels typically aren't the best fit, I'll make my own. Some progress photos.

 

A few more from yesterday.

 

Looking good! That’s already a fantastic Looking hotrod

 

very kool! you are bringing the sedan to bowling green right?

 

Thanks. Tried last year but wasn't quite ready. Sure hope to make it this year.

 

Very nice work, gonna be a fun ride for sure.

 

I have an idea of where you cut your subrails at the front to spread your firewall but I’d love to see some pictures if you have any. Thanks in advance!

 

I don't have any photos, but it was a few inches back from the front end but still under the toeboard. I'm going by memory, but I'm pretty sure thats where it is.

 

Here is a pic of a 31 firewall sliced for spreading. Might give you another idea perhaps.

 

He’s asking about the subrails

 

Nice build. Nothing like a early Hemi.

 

Chrome won’t get you home, but looks pretty.

 

Beautiful man, just beautiful. Love your chassis.

 

Hey man, what dimension did you use for those SoCal rear spring hangers.....been gathering info, it's been different from most folks

 

46.5" if I remember correctly. The SoCal hangers put the shackle right at the edge of a 16" rim. Anything greater than 46.5" would hit the rim (5" backspace).

 

Really getting different answers from everyone....anyone know the stock dimension Henry used....or where to reference it.....?

 

48.5” was the stock width on my stock axle. I was just unable to go that wide. As long as the shackles are between parallel (to the ground) and 45* you should be fine.

running a panhard bar helps too.

 

Floors started.

 

Roof insert. From Walden.

 

90% done with the firewall. Probably was as much time and effort as a chop. I had to widen the bottom about an inch, leaving the top stock. Also included some shots of the firewall feet area.

 

Some updates. Not sure why I'm doing this. Seems like the hamb is a ghost town these last few months.

Rollbar



32 cowl vent



Under cowl pedal/column/etc support.


Floors and tunnel



tail light recesses.

 

this ghost is still here! Superb workmanship, keep the updates coming.

 

... looks great. Some ghosts don't speak. Speechless.

... but we do poltergeist the "like" button.

 

lovin your work....

still lurkin...