Register now to get rid of these ads!

Hot Rods 1938/1939 ford dash question

Discussion in 'The Hokey Ass Message Board' started by brady1929, Oct 22, 2015.

  1. brady1929
    Joined: Sep 30, 2006
    Posts: 9,274

    brady1929
    Member

    Bought this dash off a Hamber. It is missing the parts/pieces on either side of the horizontal louvers in the middle. Anyone know what they are and if they are repopped? Or where I could get them? Already placed a wanted ad. Thanks.
    1938dash.jpg
     
  2. Model T1
    Joined: May 11, 2012
    Posts: 3,309

    Model T1
    Member

    This is an original 1939 deluxe dash, cobb webs and all. Little Red\'s Dash.jpg
     
  3. ash trays......
     
  4. brady1929
    Joined: Sep 30, 2006
    Posts: 9,274

    brady1929
    Member

    There is an ash tray on both sides of the louvers?
     

  5. scrap metal 48
    Joined: Sep 6, 2009
    Posts: 6,079

    scrap metal 48
    Member

    There is an ashtray and throttle knob on one side and lighter knob and choke knob on the other side...
     
  6. Good info above.........ashtray on bottom/throttle on left side & choke/lighter on right........here's finished dash in my avatar 39 with wiper switch in original throttle spot, stock choke setting and just knobs on both bottom ones......
     

    Attached Files:

    509garyd, falcongeorge and The 39 guy like this.
  7. maneri
    Joined: Dec 8, 2009
    Posts: 243

    maneri
    Member
    from ohio

    your dash is a 1938 deluxe
     
  8. Easy way to tell a '38 Deluxe and '39 dash apart. '38 windshield regulator handle is just above the radio speaker grille. '39 regulator has a round knob up on top of the dash.
     
  9. I almost bought that one till I realized it was a 38 dash. Litt
     
  10. scrap metal 48
    Joined: Sep 6, 2009
    Posts: 6,079

    scrap metal 48
    Member

    38\'s new home 009.JPG Without the glove box door, can't tell if it's a 1938 standard or deluxe dash.. Standard had no lock on glove box door...
     
  11. brady1929
    Joined: Sep 30, 2006
    Posts: 9,274

    brady1929
    Member

    Ok well I am sorry but I don't know.
    What is supposed to be below the louvers? My guess, the radio.
     
  12. scrap metal 48
    Joined: Sep 6, 2009
    Posts: 6,079

    scrap metal 48
    Member

    Yes, radio.. There is a nice chrome block-off plate if you can find one...
     
  13. Marv64
    Joined: Oct 17, 2011
    Posts: 37

    Marv64
    Member

    The 39 dash has different holes for the radio, and those radios are hard to find and expensive.
     
  14. theHIGHLANDER
    Joined: Jun 3, 2005
    Posts: 10,263

    theHIGHLANDER
    ALLIANCE MEMBER

    So with all this 38-9 dash talk, who's got a Standard glove box door and hinge? I hate to weld up a Deluxe but I will if I must. I have that to trade, and I have a clock that needs restoring for a 39 Deluxe. Any help, leads?
     
  15. Restoration of my 39 gauges & clock were handled by Mark Clawson of Anacortes, Wa, has his own website........did a super job for a reasonable price.......
     
  16. Bader2
    Joined: May 19, 2014
    Posts: 1,143

    Bader2

    Brady,this goes behind the louvers ImageUploadedByH.A.M.B.1445699911.986123.jpg
     
    scrap metal 48 likes this.
  17. brady1929
    Joined: Sep 30, 2006
    Posts: 9,274

    brady1929
    Member

    Wow that's wild Todd
     
  18. theHIGHLANDER
    Joined: Jun 3, 2005
    Posts: 10,263

    theHIGHLANDER
    ALLIANCE MEMBER

    Actually I'd trade the deluxe door for a standard. Have the clock to sell or trade too. I want the plain door for artistic reasons. And yes I'll cover that in the build thread.
     
  19. sloppy jalopies
    Joined: Jun 29, 2015
    Posts: 5,256

    sloppy jalopies
    Member

    '38-'39 standard and deluxe dashes are very similar... dlx ? had slots for horizontal trim...
    .
    the '38-'39 woodie and convertible cluster and glovebox doors taper downward towards the outside edges... DSCN2865.JPG

    the '38-'39 closed cars glovebox door is almost a rectangle... modified dash pic.
    DSCN2859.JPG
    some ashtray, lighter and speaker grill trim are ribbed [shown], some are smooth...
    DSCN2881.JPG
    hard to see but this dash has smooth trim...
    s-l1600,,, p38.jpg
    not sure if the ribs were also used on the speedometer and cluster bezels...
     
  20. Jacksmith
    Joined: Sep 24, 2009
    Posts: 1,586

    Jacksmith
    ALLIANCE MEMBER
    from Aridzona

    Notice the '39 has squared tops (vs. '38's rounded tops) on the two openings either side of the speaker grille...
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.