Technical 32 Windshield On 30-31 A

27Roadsterguy · Aug 12, 2019

Mo rust said: ↑

I used 32 upper and lower posts and a 32 roadster windshield frame on my 30/31 roadster. To make it fit, I had to widen the 32 roadster windshield frame 1 7/8 inches, but after I was done I found that a 35/36 roadster windshield would have worked as well. The 35/36 frames are tall but they could be easily cut to whatever height that you want.

I also added a 32 firewall and cowl vent to make it look more like a 32.
Click to expand...

This Looks amazing, best job of grafting the 32 windshield onto a 30/31 that I've seen. Beautiful work!

Francis bruno · Aug 13, 2019

JimA said: ↑

Used the stantions- A frame.
Click to expand...

Im planning the same set up, did you use stock hight 32 uppers ?

IRION29 · Aug 13, 2019

C9 said: ↑

I've seen a few A roadsters here on the HAMB with a fairly leaned back windshield using A stanchions and A posts.
Looked pretty good.

Granted, not as extreme as shown above, but you can go too far on the leanback bit.

It works on the car above since the grille shell is tilted back as well.

Why don't you start a thread asking for pics of A roadsters with leaned back windshields?
The "Do-a-Search" police may jump on it, but most times you get a good response.

Here's a good looking 29 as an example.
Click to expand...

This is one looks way right compared to the other two in the pic. More traditional, even the car in the background , with the 2 piece is leaned back a little too far.

Log in or Sign up

Technical 32 Windshield On 30-31 A

27Roadsterguy
Member

from St. Louis, MO

Francis bruno

IRION29
Member

from Alberta

Share This Page

Archive

Atomic Industry

Support

Subscribe

Log in or Sign up

Technical 32 Windshield On 30-31 A

27Roadsterguy Member from St. Louis, MO

Francis bruno

IRION29 Member from Alberta

Share This Page

Useful Searches

Archive

Atomic Industry

Support

Subscribe

27Roadsterguy
Member

from St. Louis, MO

IRION29
Member

from Alberta